[Thu Dec 29 20:34:13 2011] Detection parameters:
  Position = (280.1, 271.5) = 1 4 40.82 -72 3 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.0 +/- 21.5
  Background counts = 111.3
  Rate = 0.01 +/- 0.001

[Thu Dec 29 20:34:13 2011] Off-axis axis estimate = 2.36'
[Thu Dec 29 20:50:02 2011] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 20:50:02 2011] Initial guess for spatial extent in simple fitting = 7.61"
[Thu Dec 29 20:50:02 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.791
[Thu Dec 29 20:50:02 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.61"
[Thu Dec 29 21:12:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec 29 21:12:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_src3.csv
[Thu Dec 29 21:12:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec 29 21:12:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_src3.csv
[Thu Dec 29 21:12:22 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 21:12:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec 29 21:12:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Dec 29 21:12:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec 29 21:12:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Dec 29 21:12:22 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:13:16 2011] Spatial fit model total counts = 2218.740000, observed total counts = 2214.000000
[Fri Dec 30 07:13:16 2011] Offset between fit and detection position for source 3 = 1.840189 pixels
[Fri Dec 30 07:13:16 2011] Warning, changing simple spatial fit ID from 3 to 2
[Fri Dec 30 07:13:16 2011] 2347.258000 total counts/ 1640.870000 bgd. counts: snr = 17.438384
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.840189 pixels
  Position = (281.6, 272.6) = 1 4 39.46 -72 3 30.6
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 706.4 +/- 48.4
  Background counts = 1640.9
  Rate = 0.02 +/- 0.002
[Fri Dec 30 07:13:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:16 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 07:13:16 2011] Source does appear to be extended
[Fri Dec 30 07:13:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 07:13:16 2011] Source is confused with source 2
[Fri Dec 30 07:13:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:13:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 07:13:36 2011] Initial guess for spatial extent in simple fitting = 14.75"
[Fri Dec 30 07:13:36 2011] source mask rpix=3.4, npix_max = 60, mask sum = 45, frac = 0.743
[Fri Dec 30 07:13:36 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 14.75"
[Fri Dec 30 07:42:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 30 07:42:22 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_src3.csv
[Fri Dec 30 07:42:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 30 07:42:22 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_src3.csv
[Fri Dec 30 07:42:22 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:42:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 30 07:42:22 2011] fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 30 07:42:22 2011] Fit fullrun_pn_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 30 09:51:25 2011] Spatial fit model total counts = 2212.470000, observed total counts = 2214.000000
[Fri Dec 30 09:51:25 2011] Offset between fit and detection position for source 3 = 0.134638 pixels
[Fri Dec 30 09:51:25 2011] Warning, changing simple spatial fit ID from 3 to 2
[Fri Dec 30 09:51:25 2011] 2335.172000 total counts/ 1645.250000 bgd. counts: snr = 17.009206
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.134638 pixels
  Position = (281.7, 272.7) = 1 4 39.38 -72 3 30.1
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 689.9 +/- 48.3
  Background counts = 1645.2
  Rate = 0.02 +/- 0.002
[Fri Dec 30 09:51:25 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:25 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:51:25 2011] Source does appear to be extended
[Fri Dec 30 09:51:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 09:51:43 2011] XMMSAS src. selection expression = ellipse(24458.146000, 23676.780000, 884.766025, 884.766025, 0.000000, X, Y)
[Fri Dec 30 09:51:43 2011] Writing source region out to fullrun_pn_xmm0412980701_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 30 09:51:43 2011] Extracting stamp from image fullrun_pn_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (231, 222) - (333, 324)
[Fri Dec 30 09:51:43 2011] XMMSAS bgd. selection expression = annulus(24458.146000, 23676.780000, 1474.610042, 2949.220085, X, Y) && !ellipse(27943.735400, 25569.633200, 3150.912091, 3150.912091, 0.000000, X, Y) && !ellipse(24914.720001, 23881.671997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.896000, 24387.573400, 1149.976033, 1149.976033, 0.000000, X, Y)
[Fri Dec 30 09:51:43 2011] Writing fullrun_pn_xmm0412980701_pi300-10000_pass1_cl_src3.gif
[Fri Dec 30 10:29:49 2011] Mean detx,y = (250.19, 3570.96) 
[Fri Dec 30 10:30:10 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 10:31:06 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 10:31:08 2011] Setting source spectrum file to fullrun_pn_xmm0412980701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Dec 30 10:31:08 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412980701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Dec 31 01:41:55 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:56 2011] Error reading totcts from fullrun_pn_xmm0412980701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 31 01:41:56 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:56 2011] Using photon index=1.80, rate=0.0243, arf fullrun_pn_xmm0412980701_pi300-10000_pass1_cl_src3.arf
[Sat Dec 31 01:41:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:56 2011] Updating source flux to 9.1e-14
[Sat Dec 31 01:47:57 2011] Flag c found in src. 3 procflags, skipping spectral fitting