[Thu Dec 29 20:35:41 2011] Detection parameters:
  Position = (201.2, 266.8) = 1 5 55.22 -72 3 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.8 +/- 15.5
  Background counts = 12.4
  Rate = 0.009 +/- 0.0009

[Thu Dec 29 20:35:41 2011] Off-axis axis estimate = 7.42'
[Fri Dec 30 05:12:21 2011] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 05:12:21 2011] Initial guess for spatial extent in simple fitting = 10.14"
[Fri Dec 30 05:12:21 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.124
[Fri Dec 30 05:12:21 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 10.14"
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src7.csv
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src7.csv
[Fri Dec 30 07:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 30 07:13:11 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 30 07:13:26 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.192707 pixels away
[Fri Dec 30 07:13:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:26 2011] Assessing source extent using major
[Fri Dec 30 07:13:26 2011] Source does appear to be extended
[Fri Dec 30 07:13:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:29:45 2011] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:29:45 2011] Initial guess for spatial extent in simple fitting = 10.14"
[Fri Dec 30 08:29:45 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.124
[Fri Dec 30 08:29:45 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 10.14"
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src7.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src7.csv
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src7.csv
[Fri Dec 30 09:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Dec 30 09:51:22 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Dec 30 09:51:34 2011] Spatial fit model total counts = 259.653000, observed total counts = 260.000000
[Fri Dec 30 09:51:34 2011] Offset between fit and detection position for source 9 = 0.016727 pixels
[Fri Dec 30 09:51:34 2011] 262.899000 total counts/ 182.214000 bgd. counts: snr = 5.977257
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.016727 pixels
  Position = (201.2, 266.8) = 1 5 55.21 -72 3 54.4
  Extent = 4.0 (3.2-5.3)", rotation angle = 0
  Source counts = 80.7 +/- 16.2
  Background counts = 182.2
  Rate = 0.003 +/- 0.0006
[Fri Dec 30 09:51:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:51:34 2011] Source does appear to be extended
[Fri Dec 30 09:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:58:01 2011] XMMSAS src. selection expression = ellipse(17453.089060, 23164.989020, 238.663807, 238.663807, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing source region out to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src9_src.reg
[Fri Dec 30 23:58:01 2011] Extracting stamp from image fullrun_mos2_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (187, 253) - (215, 281)
[Fri Dec 30 23:58:01 2011] XMMSAS bgd. selection expression = annulus(17453.089060, 23164.989020, 397.773011, 795.546023, X, Y) && !ellipse(15813.912000, 21603.785800, 1076.048031, 1076.048031, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src9.gif
[Sat Dec 31 00:25:58 2011] Mean detx,y = (2594.22, -10408.39) 
[Sat Dec 31 00:26:01 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 00:26:15 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 00:26:15 2011] Setting source spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Dec 31 00:26:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Dec 31 00:54:28 2011] Not generating rmf since there are only 80 counts
[Sat Dec 31 00:54:28 2011] rmf not generated due to insufficient counts
[Sat Dec 31 01:41:57 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:57 2011] Error reading totcts from fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Dec 31 01:41:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:58 2011] Using photon index=1.80, rate=0.00282, arf fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src9.arf
[Sat Dec 31 01:41:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:58 2011] Updating source flux to 7e-14
[Sat Dec 31 01:44:01 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting