[Thu Dec 29 20:35:40 2011] Detection parameters:
  Position = (322.2, 296.8) = 1 4 1.26 -72 1 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54586.4 +/- 273.1
  Background counts = 41.0
  Rate = 2 +/- 0.01

[Thu Dec 29 20:35:41 2011] Off-axis axis estimate = 1.73'
[Fri Dec 30 05:12:21 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 05:12:21 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Dec 30 05:12:21 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Fri Dec 30 05:12:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 07:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 07:13:11 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 07:13:26 2011] Spatial fit model total counts = 97793.800000, observed total counts = 97794.000000
[Fri Dec 30 07:13:26 2011] Offset between fit and detection position for source 7 = 2.221139 pixels
[Fri Dec 30 07:13:26 2011] 98030.630000 total counts/ 1423.030000 bgd. counts: snr = 2560.968668
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.221139 pixels
  Position = (321.5, 294.7) = 1 4 1.90 -72 1 54.2
  Extent = 13.3 (13.2-13.4)", rotation angle = 0
  Source counts = 96607.6 +/- 313.1
  Background counts = 1423.0
  Rate = 3 +/- 0.01
[Fri Dec 30 07:13:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:26 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 07:13:26 2011] Source does appear to be extended
[Fri Dec 30 07:13:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:29:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:29:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 08:29:45 2011] Initial guess for spatial extent in simple fitting = 13.32"
[Fri Dec 30 08:29:45 2011] source mask rpix=3.1, npix_max = 50, mask sum = 36, frac = 0.710
[Fri Dec 30 08:29:45 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.32"
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 09:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 09:51:21 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 09:51:34 2011] Spatial fit model total counts = 106911.000000, observed total counts = 106911.000000
[Fri Dec 30 09:51:34 2011] Offset between fit and detection position for source 7 = 0.161880 pixels
[Fri Dec 30 09:51:34 2011] 106817.800000 total counts/ 10604.400000 bgd. counts: snr = 934.313258
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.161880 pixels
  Position = (321.5, 294.9) = 1 4 1.94 -72 1 53.6
  Extent = 12.8 (12.8-12.9)", rotation angle = 0
  Source counts = 96213.4 +/- 326.8
  Background counts = 10604.4
  Rate = 3 +/- 0.01
[Fri Dec 30 09:51:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:51:34 2011] Source does appear to be extended
[Fri Dec 30 09:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:58:01 2011] Counts = 96213.400000, rescaling region sizes by 3.000000
[Fri Dec 30 23:58:01 2011] XMMSAS src. selection expression = ellipse(27920.763200, 25606.419140, 2312.874067, 2312.874067, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing source region out to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7_src.reg
[Fri Dec 30 23:58:01 2011] Extracting stamp from image fullrun_mos2_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (189, 162) - (454, 428)
[Fri Dec 30 23:58:01 2011] XMMSAS bgd. selection expression = annulus(27920.763200, 25606.419140, 11564.370333, 23128.740666, X, Y) && !ellipse(30222.194520, 25932.881400, 314.944009, 314.944009, 0.000000, X, Y) && !ellipse(28086.638367, 24716.543304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21695.732200, 13685.239200, 450.306413, 450.306413, 0.000000, X, Y) && !ellipse(41305.994720, 22562.170227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19235.080002, 16055.541702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17453.089060, 23164.989020, 318.218409, 318.218409, 0.000000, X, Y) && !ellipse(15269.939774, 20652.653244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15813.912000, 21603.785800, 1076.048031, 1076.048031, 0.000000, X, Y) && !ellipse(18895.934525, 18897.381516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28658.454681, 16904.284210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19534.807587, 11597.274918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.057000, 16241.730000, 1773.808051, 1773.808051, 0.000000, X, Y) && !ellipse(26282.274400, 22358.356000, 1248.544522, 1248.544522, 0.000000, X, Y) && !ellipse(37358.190000, 30026.568000, 1518.552044, 1518.552044, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7.gif
[Fri Dec 30 23:58:19 2011] Mean detx,y = (-9.87, 22.68) 
[Fri Dec 30 23:58:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 00:16:58 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 00:16:58 2011] Setting source spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 31 00:16:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Dec 31 01:41:56 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:56 2011] Error reading totcts from fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 31 01:41:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:58 2011] Using photon index=1.80, rate=3.36, arf fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7.arf
[Sat Dec 31 01:41:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:58 2011] Updating source flux to 2.9e-11
[Sat Dec 31 01:47:57 2011] Reading fit data from xmm0412980701/analysis//spectral/fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7_pl.csv
[Sat Dec 31 01:47:57 2011] Spectral fit parameter nH value = 6.99396e+21
[Sat Dec 31 01:47:57 2011] Spectral fit parameter PhoIndex value = 7.19716
[Sat Dec 31 01:47:57 2011] Failed to get F(0.3-8.0) from xmm0412980701/analysis//spectral/fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Sat Dec 31 01:47:57 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:47:57 2011] Using Nh = 7e+21, photon index=7.20, rate=3.36, arf fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src7.arf
[Sat Dec 31 01:47:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:47:57 2011] Updating source flux to 1.7e-11