[Thu Dec 29 20:35:40 2011] Detection parameters:
  Position = (323.4, 284.7) = 1 4 0.13 -72 2 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1125.3 +/- 46.9
  Background counts = 45.2
  Rate = 0.05 +/- 0.002

[Thu Dec 29 20:35:41 2011] Off-axis axis estimate = 2.07'
[Fri Dec 30 05:12:21 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 05:12:21 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Fri Dec 30 05:12:21 2011] source mask rpix=1.7, npix_max = 19, mask sum = 23, frac = 1.172
[Fri Dec 30 05:12:21 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.46"
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src3.csv
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src3.csv
[Fri Dec 30 07:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Dec 30 07:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:13:26 2011] Spatial fit model total counts = 7569.640000, observed total counts = 26676.000000
[Fri Dec 30 07:13:26 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 30 07:13:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:26 2011] Assessing source extent using major
[Fri Dec 30 07:13:26 2011] Source does appear to be extended
[Fri Dec 30 07:13:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:29:45 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:29:45 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Fri Dec 30 08:29:45 2011] source mask rpix=1.7, npix_max = 19, mask sum = 23, frac = 1.172
[Fri Dec 30 08:29:45 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.46"
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src3.csv
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src3.csv
[Fri Dec 30 09:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 30 09:51:22 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 30 09:51:34 2011] Source 3 is offset by 1.529439 and -7.205916 pixels which is larger than
2 X fitted extent = 4.442731 x 4.442731, not incorporating fit results
[Fri Dec 30 09:51:34 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 41.606895 pixels away
[Fri Dec 30 09:51:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:34 2011] Assessing source extent using major
[Fri Dec 30 09:51:34 2011] Source does appear to be extended
[Fri Dec 30 09:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:58:01 2011] Counts = 1125.312744, rescaling region sizes by 2.000000
[Fri Dec 30 23:58:01 2011] XMMSAS src. selection expression = ellipse(28086.638367, 24716.543304, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing source region out to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src3_src.reg
[Fri Dec 30 23:58:01 2011] Extracting stamp from image fullrun_mos2_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (248, 210) - (398, 360)
[Fri Dec 30 23:58:01 2011] XMMSAS bgd. selection expression = annulus(28086.638367, 24716.543304, 4350.000000, 8700.000000, X, Y) && !ellipse(27920.763200, 25606.419140, 3083.832089, 3083.832089, 0.000000, X, Y) && !ellipse(30222.194520, 25932.881400, 314.944009, 314.944009, 0.000000, X, Y) && !ellipse(19235.080002, 16055.541702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18895.934525, 18897.381516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28658.454681, 16904.284210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.057000, 16241.730000, 1773.808051, 1773.808051, 0.000000, X, Y) && !ellipse(26282.274400, 22358.356000, 1248.544522, 1248.544522, 0.000000, X, Y) && !ellipse(37358.190000, 30026.568000, 1518.552044, 1518.552044, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src3.gif
[Sat Dec 31 00:18:11 2011] Mean detx,y = (-88.61, -13.21) 
[Sat Dec 31 00:18:15 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 00:24:32 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 00:24:32 2011] Setting source spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 31 00:24:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Dec 31 00:48:04 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 00:48:04 2011] rmf not generated due to insufficient counts
[Sat Dec 31 01:41:57 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:57 2011] Error reading totcts from fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 31 01:41:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:58 2011] Using photon index=1.80, rate=0.0471, arf fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src3.arf
[Sat Dec 31 01:41:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:58 2011] Updating source flux to 4e-13
[Sat Dec 31 01:44:01 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting