[Thu Dec 29 20:35:40 2011] Detection parameters:
  Position = (249.9, 157.9) = 1 5 9.64 -72 11 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.2 +/- 20.3
  Background counts = 15.4
  Rate = 0.02 +/- 0.001

[Thu Dec 29 20:35:41 2011] Off-axis axis estimate = 10.78'
[Fri Dec 30 05:12:21 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 05:12:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 05:12:21 2011] Initial guess for spatial extent in simple fitting = 11.82"
[Fri Dec 30 05:12:21 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.870
[Fri Dec 30 05:12:21 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.82"
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src4.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src4.csv
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src4.csv
[Fri Dec 30 07:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Dec 30 07:13:11 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Dec 30 07:13:26 2011] Spatial fit model total counts = 369.072000, observed total counts = 366.000000
[Fri Dec 30 07:13:26 2011] Offset between fit and detection position for source 2 = 0.027626 pixels
[Fri Dec 30 07:13:26 2011] 373.116000 total counts/ 194.776000 bgd. counts: snr = 12.778534
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.027626 pixels
  Position = (249.9, 157.9) = 1 5 9.61 -72 11 49.3
  Extent = 5.8 (5.0-6.7)", rotation angle = 0
  Source counts = 178.3 +/- 19.3
  Background counts = 194.8
  Rate = 0.006 +/- 0.0007
[Fri Dec 30 07:13:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:26 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 07:13:26 2011] Source does appear to be extended
[Fri Dec 30 07:13:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:29:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:29:45 2011] Initial guess for spatial extent in simple fitting = 5.76"
[Fri Dec 30 08:29:45 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.201
[Fri Dec 30 08:29:45 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 5.76"
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src4.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src4.csv
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src4.csv
[Fri Dec 30 09:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Dec 30 09:51:22 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Dec 30 09:51:34 2011] Spatial fit model total counts = 352.004000, observed total counts = 349.000000
[Fri Dec 30 09:51:34 2011] Offset between fit and detection position for source 2 = 0.017782 pixels
[Fri Dec 30 09:51:34 2011] 357.740000 total counts/ 183.854000 bgd. counts: snr = 12.824135
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.017782 pixels
  Position = (249.9, 157.9) = 1 5 9.62 -72 11 49.4
  Extent = 5.6 (4.9-6.6)", rotation angle = 0
  Source counts = 173.9 +/- 18.9
  Background counts = 183.9
  Rate = 0.006 +/- 0.0007
[Fri Dec 30 09:51:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:51:34 2011] Source does appear to be extended
[Fri Dec 30 09:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:58:01 2011] XMMSAS src. selection expression = ellipse(21695.732200, 13685.239200, 337.729810, 337.729810, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing source region out to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src2_src.reg
[Fri Dec 30 23:58:01 2011] Extracting stamp from image fullrun_mos2_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (231, 138) - (269, 177)
[Fri Dec 30 23:58:01 2011] XMMSAS bgd. selection expression = annulus(21695.732200, 13685.239200, 562.883016, 1125.766032, X, Y)
[Fri Dec 30 23:58:01 2011] Writing fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src2.gif
[Sat Dec 31 00:24:41 2011] Mean detx,y = (-7778.00, -10954.24) 
[Sat Dec 31 00:24:43 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 00:24:58 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 00:24:58 2011] Setting source spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 31 00:24:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Dec 31 01:41:57 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:57 2011] Error reading totcts from fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 31 01:41:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:58 2011] Using photon index=1.80, rate=0.00608, arf fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src2.arf
[Sat Dec 31 01:41:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:58 2011] Updating source flux to 1.7e-13