[Thu Dec 29 20:35:41 2011] Detection parameters:
  Position = (303.1, 260.7) = 1 4 19.22 -72 4 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.5 +/- 12.1
  Background counts = 34.1
  Rate = 0.002 +/- 0.0005

[Thu Dec 29 20:35:41 2011] Off-axis axis estimate = 2.76'
[Fri Dec 30 05:12:21 2011] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 05:12:21 2011] Initial guess for spatial extent in simple fitting = 7.81"
[Fri Dec 30 05:12:21 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949
[Fri Dec 30 05:12:21 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 7.81"
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src18.ximg exists
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Dec 30 07:13:11 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src18 appears to have run properly
[Fri Dec 30 07:13:12 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Dec 30 07:13:12 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Dec 30 07:13:12 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Dec 30 07:13:26 2011] Spatial fit model total counts = 458.245000, observed total counts = 479.000000
[Fri Dec 30 07:13:26 2011] Offset between fit and detection position for source 14 = 3.144694 pixels
[Fri Dec 30 07:13:26 2011] 513.115000 total counts/ 278.906000 bgd. counts: snr = 14.024089
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 3.144694 pixels
  Position = (302.7, 257.6) = 1 4 19.64 -72 4 36.1
  Extent = 15.6 (15.6-15.6)", rotation angle = 0
  Source counts = 234.2 +/- 22.7
  Background counts = 278.9
  Rate = 0.008 +/- 0.0008
[Fri Dec 30 07:13:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:26 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 07:13:26 2011] Source does appear to be extended
[Fri Dec 30 07:13:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:29:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:29:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 08:29:45 2011] Initial guess for spatial extent in simple fitting = 15.61"
[Fri Dec 30 08:29:45 2011] source mask rpix=3.6, npix_max = 66, mask sum = 60, frac = 0.898
[Fri Dec 30 08:29:45 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 15.61"
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src18.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src18.csv
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src18.csv
[Fri Dec 30 09:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Dec 30 09:51:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Dec 30 09:51:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Dec 30 09:51:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:51:34 2011] Warning, spatial fit 18 centroid is now closest to src. 3
[Fri Dec 30 09:51:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:51:34 2011] Source does appear to be extended
[Fri Dec 30 09:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:58:01 2011] XMMSAS src. selection expression = ellipse(26282.274400, 22358.356000, 936.408391, 936.408391, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing source region out to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src14_src.reg
[Fri Dec 30 23:58:01 2011] Extracting stamp from image fullrun_mos2_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (249, 204) - (356, 311)
[Fri Dec 30 23:58:01 2011] XMMSAS bgd. selection expression = annulus(26282.274400, 22358.356000, 1560.680652, 3121.361305, X, Y) && !ellipse(27920.763200, 25606.419140, 3083.832089, 3083.832089, 0.000000, X, Y) && !ellipse(28086.638367, 24716.543304, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src14.gif
[Sat Dec 31 00:30:25 2011] Mean detx,y = (-2010.74, -2676.30) 
[Sat Dec 31 00:30:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 00:31:15 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 00:31:15 2011] Setting source spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Dec 31 00:31:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Dec 31 01:41:58 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:58 2011] Error reading totcts from fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Dec 31 01:41:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:58 2011] Using photon index=1.80, rate=0.00819, arf fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src14.arf
[Sat Dec 31 01:41:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:58 2011] Updating source flux to 7.8e-14