[Thu Dec 29 20:35:40 2011] Detection parameters:
  Position = (347.9, 297.6) = 1 3 37.16 -72 1 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3050.2 +/- 66.7
  Background counts = 34.6
  Rate = 0.1 +/- 0.003

[Thu Dec 29 20:35:41 2011] Off-axis axis estimate = 3.58'
[Fri Dec 30 05:12:21 2011] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 05:12:21 2011] Initial guess for spatial extent in simple fitting = 8.22"
[Fri Dec 30 05:12:21 2011] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.919
[Fri Dec 30 05:12:21 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 8.22"
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src2.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src2.csv
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Dec 30 07:13:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src2.csv
[Fri Dec 30 07:13:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Dec 30 07:13:11 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Dec 30 07:13:11 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Dec 30 07:13:26 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.536430 pixels away
[Fri Dec 30 07:13:26 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:26 2011] Assessing source extent using major
[Fri Dec 30 07:13:26 2011] Source does appear to be extended
[Fri Dec 30 07:13:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 08:29:45 2011] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 08:29:45 2011] Initial guess for spatial extent in simple fitting = 8.22"
[Fri Dec 30 08:29:45 2011] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.919
[Fri Dec 30 08:29:45 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 8.22"
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src2.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src2.csv
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Dec 30 09:51:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src2.csv
[Fri Dec 30 09:51:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:51:21 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Dec 30 09:51:22 2011] fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Dec 30 09:51:22 2011] Fit fullrun_mos2_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Dec 30 09:51:34 2011] Spatial fit model total counts = 3264.230000, observed total counts = 3266.000000
[Fri Dec 30 09:51:34 2011] Offset between fit and detection position for source 1 = 1.007628 pixels
[Fri Dec 30 09:51:34 2011] 3232.400000 total counts/ 1297.500000 bgd. counts: snr = 53.716145
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.007628 pixels
  Position = (347.9, 298.6) = 1 3 37.09 -72 1 37.0
  Extent = 3.9 (3.8-4.1)", rotation angle = 0
  Source counts = 1934.9 +/- 56.9
  Background counts = 1297.5
  Rate = 0.07 +/- 0.002
[Fri Dec 30 09:51:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:51:34 2011] Source does appear to be extended
[Fri Dec 30 09:51:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:58:01 2011] Counts = 1934.900000, rescaling region sizes by 2.000000
[Fri Dec 30 23:58:01 2011] XMMSAS src. selection expression = ellipse(30222.194520, 25932.881400, 472.416014, 472.416014, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing source region out to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 30 23:58:01 2011] Extracting stamp from image fullrun_mos2_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (321, 271) - (375, 326)
[Fri Dec 30 23:58:01 2011] XMMSAS bgd. selection expression = annulus(30222.194520, 25932.881400, 1574.720045, 3149.440091, X, Y) && !ellipse(27920.763200, 25606.419140, 3083.832089, 3083.832089, 0.000000, X, Y) && !ellipse(28086.638367, 24716.543304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26282.274400, 22358.356000, 1248.544522, 1248.544522, 0.000000, X, Y)
[Fri Dec 30 23:58:01 2011] Writing fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src1.gif
[Sat Dec 31 00:17:07 2011] Mean detx,y = (-760.73, 2201.90) 
[Sat Dec 31 00:17:12 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 00:17:54 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 00:17:54 2011] Setting source spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 31 00:17:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Dec 31 01:41:56 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:57 2011] Error reading totcts from fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 31 01:41:58 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:58 2011] Using photon index=1.80, rate=0.0677, arf fullrun_mos2_xmm0412980701_pi300-10000_pass1_cl_src1.arf
[Sat Dec 31 01:41:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:58 2011] Updating source flux to 7.1e-13