[Thu Dec 29 20:34:51 2011] Detection parameters:
  Position = (321.2, 292.9) = 1 4 2.23 -72 2 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64291.6 +/- 296.6
  Background counts = 32.4
  Rate = 2 +/- 0.01

[Thu Dec 29 20:34:52 2011] Off-axis axis estimate = 1.70'
[Thu Dec 29 21:12:22 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 21:12:22 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Dec 29 21:12:22 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Dec 29 21:12:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Dec 30 05:12:21 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 05:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 05:12:21 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 05:12:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 05:12:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 05:12:21 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 05:12:21 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 05:12:21 2011] Fit fullrun_mos1_xmm0412980701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 07:13:20 2011] Spatial fit model total counts = 100446.000000, observed total counts = 100454.000000
[Fri Dec 30 07:13:20 2011] Offset between fit and detection position for source 1 = 1.448134 pixels
[Fri Dec 30 07:13:20 2011] 100305.910000 total counts/ 3132.310000 bgd. counts: snr = 1736.264653
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.448134 pixels
  Position = (321.5, 294.4) = 1 4 1.92 -72 1 55.9
  Extent = 13.0 (12.9-13.1)", rotation angle = 0
  Source counts = 97173.6 +/- 316.7
  Background counts = 3132.3
  Rate = 3 +/- 0.01
[Fri Dec 30 07:13:20 2011] Spatial fit model total counts = 45154.400000, observed total counts = 60843.000000
[Fri Dec 30 07:13:20 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 30 07:13:20 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 07:13:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 07:13:20 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 07:13:20 2011] Source does appear to be extended
[Fri Dec 30 07:13:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 07:13:20 2011] Source is confused with source 2
[Fri Dec 30 07:13:20 2011] Source is confused with source 3
[Fri Dec 30 07:42:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 07:42:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 30 07:42:22 2011] Initial guess for spatial extent in simple fitting = 13.00"
[Fri Dec 30 07:42:22 2011] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.842
[Fri Dec 30 07:42:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.00"
[Fri Dec 30 08:29:44 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 08:29:44 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 08:29:44 2011] Fit fullrun_mos1_xmm0412980701_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Dec 30 08:29:44 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 08:29:44 2011] fullrun_mos1_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 08:29:44 2011] Fit fullrun_mos1_xmm0412980701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 30 09:51:28 2011] Spatial fit model total counts = 108621.000000, observed total counts = 108592.000000
[Fri Dec 30 09:51:28 2011] Offset between fit and detection position for source 1 = 0.025851 pixels
[Fri Dec 30 09:51:28 2011] 108505.100000 total counts/ 10560.700000 bgd. counts: snr = 953.088561
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.025851 pixels
  Position = (321.5, 294.4) = 1 4 1.95 -72 1 55.9
  Extent = 13.0 (12.9-13.0)", rotation angle = 0
  Source counts = 97944.4 +/- 329.4
  Background counts = 10560.7
  Rate = 3 +/- 0.01
[Fri Dec 30 09:51:28 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:51:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:51:28 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 09:51:28 2011] Source does appear to be extended
[Fri Dec 30 09:51:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 21:43:37 2011] Counts = 97944.400000, rescaling region sizes by 3.000000
[Fri Dec 30 21:43:37 2011] XMMSAS src. selection expression = ellipse(27920.240200, 25560.182400, 2331.252067, 2331.252067, 0.000000, X, Y)
[Fri Dec 30 21:43:37 2011] Writing source region out to fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 30 21:43:37 2011] Extracting stamp from image fullrun_mos1_xmm0412980701_pi300-10000_cl_sm2.00.img.gz, (187, 160) - (455, 428)
[Fri Dec 30 21:43:37 2011] XMMSAS bgd. selection expression = annulus(27920.240200, 25560.182400, 11656.260335, 23312.520671, X, Y) && !ellipse(28152.201660, 25698.431549, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30200.339800, 25959.300800, 424.514412, 402.833612, 76.357812, X, Y) && !ellipse(27399.200836, 25251.162659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41298.123200, 22587.396600, 708.617620, 349.369610, 94.244522, X, Y) && !ellipse(28780.469208, 25989.425415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21730.324000, 13665.708800, 526.198415, 526.198415, 0.000000, X, Y)
[Fri Dec 30 21:43:37 2011] Writing fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1.gif
[Fri Dec 30 21:43:56 2011] Mean detx,y = (238.68, -114.05) 
[Fri Dec 30 21:44:02 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 22:01:30 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 22:01:30 2011] Setting source spectrum file to fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 22:01:30 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Dec 31 01:41:56 2011] Updating aperture counts using extracted products
[Sat Dec 31 01:41:56 2011] Error reading totcts from fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Dec 31 01:41:56 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:41:56 2011] Using photon index=1.80, rate=3.43, arf fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1.arf
[Sat Dec 31 01:41:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:41:56 2011] Updating source flux to 2.8e-11
[Sat Dec 31 01:42:00 2011] Flag p found in src. 1 procflags, skipping spectral fitting
[Sat Dec 31 01:42:00 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Dec 31 01:44:01 2011] Reading fit data from xmm0412980701/analysis//spectral/fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1_pl.csv
[Sat Dec 31 01:44:01 2011] Spectral fit parameter nH value = 7.25217e+21
[Sat Dec 31 01:44:01 2011] Spectral fit parameter PhoIndex value = 7.45162
[Sat Dec 31 01:44:01 2011] Failed to get F(0.3-8.0) from xmm0412980701/analysis//spectral/fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Dec 31 01:44:01 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 01:44:01 2011] Using Nh = 7.3e+21, photon index=7.45, rate=3.43, arf fullrun_mos1_xmm0412980701_pi300-10000_pass1_cl_src1.arf
[Sat Dec 31 01:44:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 01:44:01 2011] Updating source flux to 1.7e-11