[Wed Mar 28 21:20:00 2012] Detection parameters:
  Position = (332.4, 286.9) = 1 3 37.35 -72 1 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2733.9 +/- 62.8
  Background counts = 39.7
  Rate = 0.08 +/- 0.002

[Wed Mar 28 21:20:01 2012] Off-axis axis estimate = 2.60'
[Wed Mar 28 22:58:06 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 22:58:06 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Wed Mar 28 22:58:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Wed Mar 28 22:58:06 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.73"
[Thu Mar 29 00:55:30 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 29 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_src3.csv
[Thu Mar 29 00:55:30 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 29 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_src3.csv
[Thu Mar 29 00:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:55:30 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 29 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Mar 29 00:55:30 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 29 00:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Mar 29 00:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 00:55:45 2012] Source 2 is offset by 7.471556 and 5.965117 pixels which is larger than
2 X fitted extent = 7.106299 x 7.106299, not incorporating fit results
[Thu Mar 29 00:55:45 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:55:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:55:45 2012] Assessing source extent using major
[Thu Mar 29 00:55:45 2012] Source does appear to be extended
[Thu Mar 29 00:55:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 02:14:30 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 02:14:30 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Thu Mar 29 02:14:30 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Thu Mar 29 02:14:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.73"
[Thu Mar 29 03:02:24 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 29 03:02:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_src3.csv
[Thu Mar 29 03:02:24 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 29 03:02:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_src3.csv
[Thu Mar 29 03:02:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 03:02:25 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 29 03:02:25 2012] fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 29 03:02:25 2012] Fit fullrun_mos2_xmm0412980301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar 29 03:02:38 2012] Spatial fit model total counts = 3622.710000, observed total counts = 3421.000000
[Thu Mar 29 03:02:38 2012] Offset between fit and detection position for source 2 = 0.112398 pixels
[Thu Mar 29 03:02:38 2012] 3551.170000 total counts/ 1705.370000 bgd. counts: snr = 44.696687
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.112398 pixels
  Position = (332.3, 286.7) = 1 3 37.37 -72 1 34.3
  Extent = 4.9 (4.7-5.1)", rotation angle = 0
  Source counts = 1845.8 +/- 59.6
  Background counts = 1705.4
  Rate = 0.05 +/- 0.002
[Thu Mar 29 03:02:38 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 03:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 03:02:38 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 03:02:38 2012] Source does appear to be extended
[Thu Mar 29 03:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 08:20:08 2012] Counts = 1845.800000, rescaling region sizes by 2.000000
[Thu Mar 29 08:20:08 2012] XMMSAS src. selection expression = ellipse(28865.500600, 24898.599000, 589.286417, 589.286417, 0.000000, X, Y)
[Thu Mar 29 08:20:08 2012] Writing source region out to fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar 29 08:20:08 2012] Extracting stamp from image fullrun_mos2_xmm0412980301_pi300-10000_cl_sm2.00.img.gz, (298, 253) - (366, 321)
[Thu Mar 29 08:20:08 2012] XMMSAS bgd. selection expression = annulus(28865.500600, 24898.599000, 1964.288057, 3928.576113, X, Y) && !ellipse(26658.030823, 24068.381622, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26507.668549, 24888.076782, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29003.353607, 22698.381195, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 08:20:08 2012] Writing fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2.gif
[Thu Mar 29 08:46:31 2012] Mean detx,y = (-1048.58, 542.98) 
[Thu Mar 29 08:46:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 08:47:18 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 08:47:18 2012] Setting source spectrum file to fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 29 08:47:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar 29 09:08:27 2012] Updating aperture counts using extracted products
[Thu Mar 29 09:08:27 2012] Error reading totcts from fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 29 09:08:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 09:08:29 2012] Using photon index=1.80, rate=0.0501, arf fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2.arf
[Thu Mar 29 09:08:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 09:08:29 2012] Updating source flux to 4.9e-13
[Thu Mar 29 09:10:20 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Thu Mar 29 09:10:42 2012] Reading fit data from xmm0412980301/analysis//spectral/fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2_pl.csv
[Thu Mar 29 09:10:42 2012] Spectral fit parameter nH value = 2.86575e+20
[Thu Mar 29 09:10:42 2012] Spectral fit parameter PhoIndex value = 0.670659
[Thu Mar 29 09:10:42 2012] Failed to get F(0.3-8.0) from xmm0412980301/analysis//spectral/fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 09:10:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 09:10:42 2012] Using Nh = 2.9e+20, photon index=0.67, rate=0.0501, arf fullrun_mos2_xmm0412980301_pi300-10000_pass1_cl_src2.arf
[Thu Mar 29 09:10:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 09:10:42 2012] Updating source flux to 9.3e-13