[Wed Mar 28 21:19:17 2012] Detection parameters:
  Position = (307.0, 281.0) = 1 4 1.21 -72 1 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92352.4 +/- 360.4
  Background counts = 33.3
  Rate = 3 +/- 0.01

[Wed Mar 28 21:19:18 2012] Off-axis axis estimate = 1.40'
[Wed Mar 28 21:36:37 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 21:36:37 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Wed Mar 28 21:36:37 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Wed Mar 28 21:36:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.13"
[Wed Mar 28 22:58:05 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 22:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 22:58:05 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 22:58:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 22:58:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 22:58:05 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 22:58:05 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 22:58:05 2012] Fit fullrun_mos1_xmm0412980301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 00:55:39 2012] Spatial fit model total counts = 147981.000000, observed total counts = 148052.000000
[Thu Mar 29 00:55:39 2012] Offset between fit and detection position for source 1 = 1.377272 pixels
[Thu Mar 29 00:55:39 2012] 147820.350000 total counts/ 2457.350000 bgd. counts: snr = 2932.380809
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.377272 pixels
  Position = (306.2, 282.2) = 1 4 1.90 -72 1 54.2
  Extent = 13.1 (13.0-13.1)", rotation angle = 0
  Source counts = 145363.0 +/- 384.5
  Background counts = 2457.3
  Rate = 4 +/- 0.01
[Thu Mar 29 00:55:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 00:55:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 00:55:39 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 00:55:39 2012] Source does appear to be extended
[Thu Mar 29 00:55:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 01:00:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 01:00:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 01:00:32 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Thu Mar 29 01:00:32 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Thu Mar 29 01:00:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.05"
[Thu Mar 29 02:14:29 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 02:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 02:14:29 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 02:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 02:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 02:14:30 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 02:14:30 2012] fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 02:14:30 2012] Fit fullrun_mos1_xmm0412980301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 03:02:32 2012] Spatial fit model total counts = 158591.000000, observed total counts = 158371.000000
[Thu Mar 29 03:02:32 2012] Offset between fit and detection position for source 1 = 0.022950 pixels
[Thu Mar 29 03:02:32 2012] 158830.300000 total counts/ 14245.300000 bgd. counts: snr = 1211.399638
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022950 pixels
  Position = (306.3, 282.2) = 1 4 1.88 -72 1 54.2
  Extent = 12.9 (12.9-13.0)", rotation angle = 0
  Source counts = 144585.0 +/- 398.5
  Background counts = 14245.3
  Rate = 4 +/- 0.01
[Thu Mar 29 03:02:32 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 03:02:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 03:02:32 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 03:02:32 2012] Source does appear to be extended
[Thu Mar 29 03:02:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 03:26:11 2012] Counts = 144585.000000, rescaling region sizes by 3.000000
[Thu Mar 29 03:26:11 2012] XMMSAS src. selection expression = ellipse(26596.277000, 24502.675600, 2327.796067, 2327.796067, 0.000000, X, Y)
[Thu Mar 29 03:26:11 2012] Writing source region out to fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 29 03:26:11 2012] Extracting stamp from image fullrun_mos1_xmm0412980301_pi300-10000_cl_sm2.00.img.gz, (172, 148) - (440, 416)
[Thu Mar 29 03:26:11 2012] XMMSAS bgd. selection expression = annulus(26596.277000, 24502.675600, 11638.980335, 23277.960670, X, Y) && !ellipse(28861.301000, 24891.888000, 380.539211, 380.539211, 0.000000, X, Y) && !ellipse(39976.499420, 21512.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25722.382568, 23872.727203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.326233, 24472.933746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27504.730286, 26764.999298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27720.472656, 25186.212677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.838348, 25805.652252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39527.337494, 33273.556702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20362.540848, 12633.896591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30368.814000, 25782.606000, 1290.592037, 1290.592037, 0.000000, X, Y)
[Thu Mar 29 03:26:11 2012] Writing fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1.gif
[Thu Mar 29 03:26:29 2012] Mean detx,y = (-1391.11, 209.32) 
[Thu Mar 29 03:26:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 03:38:42 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 03:38:42 2012] Setting source spectrum file to fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 03:38:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 29 09:08:26 2012] Updating aperture counts using extracted products
[Thu Mar 29 09:08:26 2012] Error reading totcts from fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 09:08:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 09:08:27 2012] Using photon index=1.80, rate=3.93, arf fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 09:08:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 09:08:27 2012] Updating source flux to 3.4e-11
[Thu Mar 29 09:10:20 2012] Reading fit data from xmm0412980301/analysis//spectral/fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 29 09:10:20 2012] Spectral fit parameter nH value = 7.15659e+21
[Thu Mar 29 09:10:20 2012] Spectral fit parameter PhoIndex value = 7.42024
[Thu Mar 29 09:10:20 2012] Failed to get F(0.3-8.0) from xmm0412980301/analysis//spectral/fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 09:10:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 09:10:20 2012] Using Nh = 7.2e+21, photon index=7.42, rate=3.93, arf fullrun_mos1_xmm0412980301_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 09:10:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 09:10:20 2012] Updating source flux to 2e-11