[Mon May 28 10:20:37 2012] Detection parameters:
  Position = (301.0, 307.1) = 1 3 37.54 -72 1 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3748.6 +/- 75.3
  Background counts = 67.2
  Rate = 0.1 +/- 0.002

[Mon May 28 10:20:38 2012] Off-axis axis estimate = 0.65'
[Mon May 28 11:33:45 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:33:45 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Mon May 28 11:33:45 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Mon May 28 11:33:45 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.76"
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 28 12:10:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src2.csv
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 28 12:10:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src2.csv
[Mon May 28 12:10:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 28 12:10:50 2012] Fit fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon May 28 12:10:58 2012] Source 3 is offset by -6.186940 and -7.120320 pixels which is larger than
2 X fitted extent = 0.776561 x 0.776561, not incorporating fit results
[Mon May 28 12:10:58 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:10:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:10:58 2012] Assessing source extent using major
[Mon May 28 12:10:58 2012] Source does appear to be extended
[Mon May 28 12:10:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 13:55:47 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Mon May 28 13:55:47 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Mon May 28 13:55:47 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Mon May 28 13:55:47 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.76"
[Mon May 28 14:26:17 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 28 14:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src2.csv
[Mon May 28 14:26:17 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 28 14:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src2.csv
[Mon May 28 14:26:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:26:18 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 28 14:26:18 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 28 14:26:18 2012] Fit fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 28 14:26:25 2012] Spatial fit model total counts = 4405.600000, observed total counts = 4340.000000
[Mon May 28 14:26:25 2012] Offset between fit and detection position for source 3 = 0.100980 pixels
[Mon May 28 14:26:25 2012] 4366.400000 total counts/ 2058.220000 bgd. counts: snr = 50.877267
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.100980 pixels
  Position = (300.9, 307.2) = 1 3 37.62 -72 1 35.5
  Extent = 4.8 (4.6-5.0)", rotation angle = 0
  Source counts = 2308.2 +/- 66.1
  Background counts = 2058.2
  Rate = 0.07 +/- 0.002
[Mon May 28 14:26:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:26:25 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:26:25 2012] Source does appear to be extended
[Mon May 28 14:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 17:59:54 2012] Counts = 2308.180000, rescaling region sizes by 2.000000
[Mon May 28 17:59:54 2012] XMMSAS src. selection expression = ellipse(26133.807720, 26673.937600, 572.242816, 572.242816, 0.000000, X, Y)
[Mon May 28 17:59:54 2012] Writing source region out to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 17:59:54 2012] Extracting stamp from image fullrun_mos2_xmm0412980201_pi300-10000_cl_sm2.00.img.gz, (268, 274) - (334, 340)
[Mon May 28 17:59:54 2012] XMMSAS bgd. selection expression = annulus(26133.807720, 26673.937600, 1907.476055, 3814.952110, X, Y) && !ellipse(23885.732200, 26232.346600, 3014.448087, 3014.448087, 0.000000, X, Y) && !ellipse(23565.216400, 27230.553375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30669.489800, 30933.762400, 773.172022, 773.172022, 0.000000, X, Y) && !ellipse(24289.954437, 24691.559479, 1740.000000, 1740.000000, 0.000000, X, Y)
[Mon May 28 17:59:54 2012] Writing fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src3.gif
[Mon May 28 18:06:42 2012] Mean detx,y = (558.98, -2094.18) 
[Mon May 28 18:06:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 18:06:59 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 18:06:59 2012] Setting source spectrum file to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 18:06:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 18:35:27 2012] Updating aperture counts using extracted products
[Mon May 28 18:35:27 2012] Error reading totcts from fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 18:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:35:28 2012] Using photon index=1.80, rate=0.0658, arf fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src3.arf
[Mon May 28 18:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:35:28 2012] Updating source flux to 7.1e-13
[Mon May 28 18:37:34 2012] Flag b found in src. 3 procflags, skipping spectral fitting