[Mon May 28 10:20:37 2012] Detection parameters:
  Position = (428.3, 268.2) = 1 1 37.63 -72 4 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 737.8 +/- 33.7
  Background counts = 32.1
  Rate = 0.02 +/- 0.0009

[Mon May 28 10:20:38 2012] Off-axis axis estimate = 9.67'
[Mon May 28 11:33:45 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:33:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 11:33:45 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Mon May 28 11:33:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Mon May 28 11:33:45 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.26"
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 28 12:10:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src4.csv
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 28 12:10:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src4.csv
[Mon May 28 12:10:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 28 12:10:50 2012] Fit fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon May 28 12:10:58 2012] Spatial fit model total counts = 921.460000, observed total counts = 922.000000
[Mon May 28 12:10:58 2012] Offset between fit and detection position for source 2 = 0.308512 pixels
[Mon May 28 12:10:58 2012] 922.309000 total counts/ 438.727000 bgd. counts: snr = 23.087289
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.308512 pixels
  Position = (428.1, 268.4) = 1 1 37.85 -72 4 21.6
  Extent = 5.7 (5.2-6.1)", rotation angle = 0
  Source counts = 483.6 +/- 30.4
  Background counts = 438.7
  Rate = 0.01 +/- 0.0009
[Mon May 28 12:10:58 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:10:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:10:58 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:10:58 2012] Source does appear to be extended
[Mon May 28 12:10:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 13:55:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 13:55:47 2012] Initial guess for spatial extent in simple fitting = 5.68"
[Mon May 28 13:55:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.921
[Mon May 28 13:55:47 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.68"
[Mon May 28 14:26:17 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 28 14:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src4.csv
[Mon May 28 14:26:17 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 28 14:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src4.csv
[Mon May 28 14:26:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:26:18 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 28 14:26:18 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 28 14:26:18 2012] Fit fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon May 28 14:26:25 2012] Warning, spatial fit 4 centroid is now closest to src. 7
[Mon May 28 14:26:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:26:25 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:26:25 2012] Source does appear to be extended
[Mon May 28 14:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 17:59:54 2012] XMMSAS src. selection expression = ellipse(37193.019140, 23303.100400, 340.508410, 340.508410, 0.000000, X, Y)
[Mon May 28 17:59:54 2012] Writing source region out to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src2_src.reg
[Mon May 28 17:59:54 2012] Extracting stamp from image fullrun_mos2_xmm0412980201_pi300-10000_cl_sm2.00.img.gz, (408, 249) - (448, 288)
[Mon May 28 17:59:54 2012] XMMSAS bgd. selection expression = annulus(37193.019140, 23303.100400, 567.514016, 1135.028033, X, Y)
[Mon May 28 17:59:54 2012] Writing fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src2.gif
[Mon May 28 18:07:13 2012] Mean detx,y = (7757.88, -11159.24) 
[Mon May 28 18:07:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 18:07:21 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 18:07:21 2012] Setting source spectrum file to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 18:07:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 28 18:35:27 2012] Updating aperture counts using extracted products
[Mon May 28 18:35:27 2012] Error reading totcts from fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 18:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:35:28 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src2.arf
[Mon May 28 18:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:35:28 2012] Updating source flux to 4.1e-13