[Mon May 28 10:20:37 2012] Detection parameters:
  Position = (276.0, 301.1) = 1 4 1.08 -72 2 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84025.4 +/- 342.8
  Background counts = 70.9
  Rate = 2 +/- 0.01

[Mon May 28 10:20:38 2012] Off-axis axis estimate = 1.64'
[Mon May 28 11:33:45 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:33:45 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon May 28 11:33:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon May 28 11:33:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 12:10:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src1.csv
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 12:10:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src1.csv
[Mon May 28 12:10:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 12:10:50 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 12:10:50 2012] Fit fullrun_mos2_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 12:10:58 2012] Spatial fit model total counts = 127307.000000, observed total counts = 130264.000000
[Mon May 28 12:10:58 2012] Offset between fit and detection position for source 1 = 1.331562 pixels
[Mon May 28 12:10:58 2012] 127406.620000 total counts/ 5808.620000 bgd. counts: snr = 1595.474800
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.331562 pixels
  Position = (275.1, 302.1) = 1 4 1.91 -72 1 57.5
  Extent = 12.6 (12.5-12.6)", rotation angle = 0
  Source counts = 121598.0 +/- 356.9
  Background counts = 5808.6
  Rate = 3 +/- 0.01
[Mon May 28 12:10:58 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:10:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:10:58 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:10:58 2012] Source does appear to be extended
[Mon May 28 12:10:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 13:55:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 13:55:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 13:55:47 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Mon May 28 13:55:47 2012] source mask rpix=2.9, npix_max = 45, mask sum = 35, frac = 0.763
[Mon May 28 13:55:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.56"
[Mon May 28 14:26:17 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 14:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src1.csv
[Mon May 28 14:26:17 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 14:26:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src1.csv
[Mon May 28 14:26:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:26:17 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 14:26:18 2012] fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 14:26:18 2012] Fit fullrun_mos2_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 14:26:25 2012] Spatial fit model total counts = 136340.000000, observed total counts = 138184.000000
[Mon May 28 14:26:25 2012] Offset between fit and detection position for source 1 = 0.005409 pixels
[Mon May 28 14:26:25 2012] 136600.300000 total counts/ 14202.300000 bgd. counts: snr = 1027.058025
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005409 pixels
  Position = (275.1, 302.1) = 1 4 1.91 -72 1 57.5
  Extent = 12.6 (12.5-12.6)", rotation angle = 0
  Source counts = 122398.0 +/- 369.6
  Background counts = 14202.3
  Rate = 3 +/- 0.01
[Mon May 28 14:26:25 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:26:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:26:25 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:26:25 2012] Source does appear to be extended
[Mon May 28 14:26:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 17:59:54 2012] Counts = 122398.000000, rescaling region sizes by 3.000000
[Mon May 28 17:59:54 2012] XMMSAS src. selection expression = ellipse(23885.732200, 26232.346600, 2260.836065, 2260.836065, 0.000000, X, Y)
[Mon May 28 17:59:54 2012] Writing source region out to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 17:59:54 2012] Extracting stamp from image fullrun_mos2_xmm0412980201_pi300-10000_cl_sm2.00.img.gz, (145, 172) - (405, 432)
[Mon May 28 17:59:54 2012] XMMSAS bgd. selection expression = annulus(23885.732200, 26232.346600, 11304.180325, 22608.360651, X, Y) && !ellipse(26133.807720, 26673.937600, 381.495211, 381.495211, 0.000000, X, Y) && !ellipse(23565.216400, 27230.553375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37193.019140, 23303.100400, 454.011213, 454.011213, 0.000000, X, Y) && !ellipse(15513.245331, 12232.261017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16354.009800, 32353.139600, 397.231211, 397.231211, 0.000000, X, Y) && !ellipse(30669.489800, 30933.762400, 773.172022, 773.172022, 0.000000, X, Y) && !ellipse(11280.984440, 21211.041000, 1514.096044, 890.328026, 81.373826, X, Y) && !ellipse(11412.518000, 21845.182000, 2250.072065, 2250.072065, 0.000000, X, Y) && !ellipse(11759.169600, 22314.484000, 1307.008038, 1307.008038, 0.000000, X, Y) && !ellipse(24289.954437, 24691.559479, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(36799.998474, 35027.960236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17626.850433, 14356.167633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11210.769028, 21612.763611, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 17:59:54 2012] Writing fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1.gif
[Mon May 28 18:00:04 2012] Mean detx,y = (145.12, 109.83) 
[Mon May 28 18:00:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 18:06:37 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 18:06:37 2012] Setting source spectrum file to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 18:06:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 18:35:27 2012] Updating aperture counts using extracted products
[Mon May 28 18:35:27 2012] Error reading totcts from fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 18:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:35:28 2012] Using photon index=1.80, rate=3.49, arf fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1.arf
[Mon May 28 18:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:35:28 2012] Updating source flux to 3.1e-11
[Mon May 28 18:39:46 2012] Reading fit data from xmm0412980201/analysis//spectral/fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 18:39:46 2012] Spectral fit parameter nH value = 7.00956e+21
[Mon May 28 18:39:46 2012] Spectral fit parameter PhoIndex value = 7.2869
[Mon May 28 18:39:46 2012] Failed to get F(0.3-8.0) from xmm0412980201/analysis//spectral/fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 18:39:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:39:46 2012] Using Nh = 7e+21, photon index=7.29, rate=3.49, arf fullrun_mos2_xmm0412980201_pi300-10000_pass1_cl_src1.arf
[Mon May 28 18:39:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:39:46 2012] Updating source flux to 1.8e-11