[Mon May 28 10:20:16 2012] Detection parameters:
  Position = (284.6, 305.2) = 1 3 52.95 -72 1 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 932.1 +/- 65.3
  Background counts = 61.4
  Rate = 0.03 +/- 0.002

[Mon May 28 10:20:17 2012] Off-axis axis estimate = 1.11'
[Mon May 28 10:37:54 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Mon May 28 10:37:54 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Mon May 28 10:37:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.677
[Mon May 28 10:37:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.99"
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 28 11:33:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src3.csv
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 28 11:33:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src3.csv
[Mon May 28 11:33:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 28 11:33:44 2012] Fit fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 28 12:10:55 2012] Source 2 is offset by 7.060098 and 2.313912 pixels which is larger than
2 X fitted extent = 3.632763 x 3.632763, not incorporating fit results
[Mon May 28 12:10:56 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:10:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:10:56 2012] Assessing source extent using major
[Mon May 28 12:10:56 2012] Source does appear to be extended
[Mon May 28 12:10:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:10:56 2012] Source is confused with source 12
[Mon May 28 12:41:19 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Mon May 28 12:41:19 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Mon May 28 12:41:19 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.677
[Mon May 28 12:41:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.99"
[Mon May 28 13:55:46 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 28 13:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src3.csv
[Mon May 28 13:55:46 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 28 13:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src3.csv
[Mon May 28 13:55:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 13:55:47 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 28 13:55:47 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 28 13:55:47 2012] Fit fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 28 14:26:22 2012] Source 2 is offset by 7.060098 and 2.147544 pixels which is larger than
2 X fitted extent = 3.686796 x 3.686796, not incorporating fit results
[Mon May 28 14:26:22 2012] Spatial fit model total counts = 4171.790000, observed total counts = 4196.000000
[Mon May 28 14:26:22 2012] Offset between fit and detection position for source 2 = 3.898836 pixels
[Mon May 28 14:26:22 2012] Warning, changing simple spatial fit ID from 3 to 9
[Mon May 28 14:26:22 2012] 3883.140000 total counts/ 2338.460000 bgd. counts: snr = 31.942842
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.898836 pixels
  Position = (281.5, 307.5) = 1 3 55.90 -72 1 33.9
  Extent = 12.7 (11.5-14.1)", rotation angle = 0
  Source counts = 1544.7 +/- 62.3
  Background counts = 2338.5
  Rate = 0.04 +/- 0.002
[Mon May 28 14:26:22 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:26:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:26:22 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:26:22 2012] Source does appear to be extended
[Mon May 28 14:26:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 16:25:40 2012] Counts = 1544.680000, rescaling region sizes by 2.000000
[Mon May 28 16:25:40 2012] XMMSAS src. selection expression = ellipse(24442.000000, 26704.000000, 1527.576044, 1527.576044, 0.000000, X, Y)
[Mon May 28 16:25:40 2012] Writing source region out to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src2_src.reg
[Mon May 28 16:25:40 2012] Extracting stamp from image fullrun_mos1_xmm0412980201_pi300-10000_cl_sm2.00.img.gz, (194, 220) - (369, 395)
[Mon May 28 16:25:40 2012] XMMSAS bgd. selection expression = annulus(24442.000000, 26704.000000, 5091.920147, 10183.840293, X, Y) && !ellipse(23876.220692, 26267.573400, 3074.712088, 3074.712088, 0.000000, X, Y) && !ellipse(26140.229030, 26665.795600, 400.182412, 400.182412, 0.000000, X, Y) && !ellipse(16363.388367, 32314.961029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22584.784000, 26332.536000, 614.600018, 614.600018, 0.000000, X, Y) && !ellipse(25191.230682, 26769.425232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.679657, 27195.496368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23910.602000, 27364.844000, 1201.312035, 1201.312035, 0.000000, X, Y)
[Mon May 28 16:25:40 2012] Writing fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src2.gif
[Mon May 28 16:35:34 2012] Mean detx,y = (306.62, -273.84) 
[Mon May 28 16:35:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:37:53 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:37:53 2012] Setting source spectrum file to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 16:37:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 28 18:35:27 2012] Updating aperture counts using extracted products
[Mon May 28 18:35:27 2012] Error reading totcts from fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 18:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:35:27 2012] Using photon index=1.80, rate=0.0439, arf fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src2.arf
[Mon May 28 18:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:35:27 2012] Updating source flux to 4.8e-13
[Mon May 28 18:35:28 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Mon May 28 18:35:28 2012] Flag c found in src. 2 procflags, skipping spectral fitting