[Mon May 28 10:20:17 2012] Detection parameters:
  Position = (279.6, 321.5) = 1 3 57.70 -72 0 34.0
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 87.4 +/- 20.3
  Background counts = 236.5
  Rate = 0.003 +/- 0.0006

[Mon May 28 10:20:17 2012] Off-axis axis estimate = 2.16'
[Mon May 28 10:37:54 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Mon May 28 10:37:54 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Mon May 28 10:37:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 22, frac = 1.110
[Mon May 28 10:37:54 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.51"
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src14.ximg exists
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon May 28 11:33:44 2012] Fit fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src14 appears to have run properly
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon May 28 11:33:45 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon May 28 11:33:45 2012] Fit fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon May 28 12:10:56 2012] Spatial fit model total counts = 2350.060000, observed total counts = 2190.000000
[Mon May 28 12:10:56 2012] Offset between fit and detection position for source 17 = 7.612583 pixels
[Mon May 28 12:10:56 2012] 2260.883000 total counts/ 1703.870000 bgd. counts: snr = 13.494199
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 7.612583 pixels
  Position = (275.4, 315.1) = 1 4 1.63 -72 1 0.9
  Extent = 15.0 (15.0-30.0)", rotation angle = 0
  Source counts = 557.0 +/- 47.5
  Background counts = 1703.9
  Rate = 0.02 +/- 0.001
[Mon May 28 12:10:56 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:10:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:10:56 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:10:56 2012] Source does appear to be extended
[Mon May 28 12:10:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:41:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 12:41:19 2012] Initial guess for spatial extent in simple fitting = 15.02"
[Mon May 28 12:41:19 2012] source mask rpix=3.5, npix_max = 62, mask sum = 49, frac = 0.784
[Mon May 28 12:41:19 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 15.02"
[Mon May 28 13:55:46 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src14.ximg exists
[Mon May 28 13:55:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src14.csv
[Mon May 28 13:55:46 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon May 28 13:55:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src14.csv
[Mon May 28 13:55:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 13:55:47 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon May 28 13:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon May 28 13:55:47 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon May 28 13:55:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon May 28 13:55:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:26:22 2012] Warning, spatial fit 14 centroid is now closest to src. 12
[Mon May 28 14:26:22 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:26:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:26:22 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:26:22 2012] Source does appear to be extended
[Mon May 28 14:26:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:26:22 2012] Source is confused with source 2
[Mon May 28 16:25:40 2012] XMMSAS src. selection expression = ellipse(23910.602000, 27364.844000, 900.984026, 900.984026, 0.000000, X, Y)
[Mon May 28 16:25:40 2012] Writing source region out to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src17_src.reg
[Mon May 28 16:25:40 2012] Extracting stamp from image fullrun_mos1_xmm0412980201_pi300-10000_cl_sm2.00.img.gz, (224, 263) - (327, 367)
[Mon May 28 16:25:40 2012] XMMSAS bgd. selection expression = annulus(23910.602000, 27364.844000, 1501.640043, 3003.280086, X, Y) && !ellipse(23876.220692, 26267.573400, 3074.712088, 3074.712088, 0.000000, X, Y) && !ellipse(26140.229030, 26665.795600, 400.182412, 400.182412, 0.000000, X, Y) && !ellipse(24442.000000, 26704.000000, 1018.384029, 1018.384029, 0.000000, X, Y) && !ellipse(22584.784000, 26332.536000, 614.600018, 614.600018, 0.000000, X, Y) && !ellipse(25191.230682, 26769.425232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.679657, 27195.496368, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 16:25:40 2012] Writing fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src17.gif
[Mon May 28 16:39:58 2012] Mean detx,y = (172.54, 125.54) 
[Mon May 28 16:39:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:40:12 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:40:12 2012] Setting source spectrum file to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 28 16:40:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon May 28 18:35:27 2012] Updating aperture counts using extracted products
[Mon May 28 18:35:27 2012] Error reading totcts from fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 28 18:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:35:27 2012] Using photon index=1.80, rate=0.0158, arf fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src17.arf
[Mon May 28 18:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:35:27 2012] Updating source flux to 1.5e-13
[Mon May 28 18:35:28 2012] Flag c found in src. 17 procflags, skipping spectral fitting