[Mon May 28 10:20:16 2012] Detection parameters:
  Position = (276.0, 300.9) = 1 4 1.10 -72 2 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81822.2 +/- 341.0
  Background counts = 65.7
  Rate = 2 +/- 0.01

[Mon May 28 10:20:17 2012] Off-axis axis estimate = 1.64'
[Mon May 28 10:37:54 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 10:37:54 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon May 28 10:37:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.799
[Mon May 28 10:37:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 11:33:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src1.csv
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 11:33:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src1.csv
[Mon May 28 11:33:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 11:33:44 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 11:33:44 2012] Fit fullrun_mos1_xmm0412980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 12:10:55 2012] Spatial fit model total counts = 139737.000000, observed total counts = 132949.000000
[Mon May 28 12:10:55 2012] Offset between fit and detection position for source 1 = 1.836978 pixels
[Mon May 28 12:10:55 2012] 139526.960000 total counts/ 4953.960000 bgd. counts: snr = 1911.972697
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.836978 pixels
  Position = (275.0, 302.5) = 1 4 2.01 -72 1 55.7
  Extent = 12.8 (12.8-12.9)", rotation angle = 0
  Source counts = 134573.0 +/- 373.5
  Background counts = 4954.0
  Rate = 4 +/- 0.01
[Mon May 28 12:10:56 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:10:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:10:56 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:10:56 2012] Source does appear to be extended
[Mon May 28 12:10:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:41:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 12:41:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 12:41:19 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Mon May 28 12:41:19 2012] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.736
[Mon May 28 12:41:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.83"
[Mon May 28 13:55:46 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 13:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src1.csv
[Mon May 28 13:55:46 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 13:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src1.csv
[Mon May 28 13:55:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 13:55:47 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 13:55:47 2012] fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 13:55:47 2012] Fit fullrun_mos1_xmm0412980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 14:26:22 2012] Spatial fit model total counts = 150742.000000, observed total counts = 143547.000000
[Mon May 28 14:26:22 2012] Offset between fit and detection position for source 1 = 0.006090 pixels
[Mon May 28 14:26:22 2012] 149860.300000 total counts/ 13638.300000 bgd. counts: snr = 1166.452700
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006090 pixels
  Position = (275.0, 302.5) = 1 4 2.02 -72 1 55.7
  Extent = 12.8 (12.8-12.9)", rotation angle = 0
  Source counts = 136222.0 +/- 387.1
  Background counts = 13638.3
  Rate = 4 +/- 0.01
[Mon May 28 14:26:22 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:26:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:26:22 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:26:22 2012] Source does appear to be extended
[Mon May 28 14:26:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:26:22 2012] Source is confused with source 2
[Mon May 28 16:25:40 2012] Counts = 136222.000000, rescaling region sizes by 3.000000
[Mon May 28 16:25:40 2012] XMMSAS src. selection expression = ellipse(23876.220692, 26267.573400, 2306.034066, 2306.034066, 0.000000, X, Y)
[Mon May 28 16:25:40 2012] Writing source region out to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 16:25:40 2012] Extracting stamp from image fullrun_mos1_xmm0412980201_pi300-10000_cl_sm2.00.img.gz, (142, 170) - (408, 435)
[Mon May 28 16:25:40 2012] XMMSAS bgd. selection expression = annulus(23876.220692, 26267.573400, 11530.170332, 23060.340664, X, Y) && !ellipse(26140.229030, 26665.795600, 400.182412, 400.182412, 0.000000, X, Y) && !ellipse(24442.000000, 26704.000000, 1018.384029, 1018.384029, 0.000000, X, Y) && !ellipse(37245.573456, 23283.276184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16363.388367, 32314.961029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11692.340897, 22219.682068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22584.784000, 26332.536000, 614.600018, 614.600018, 0.000000, X, Y) && !ellipse(25191.230682, 26769.425232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.679657, 27195.496368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11049.156000, 21732.172000, 2079.496060, 791.206423, 227.527000, X, Y) && !ellipse(23910.602000, 27364.844000, 1201.312035, 1201.312035, 0.000000, X, Y)
[Mon May 28 16:25:40 2012] Writing fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1.gif
[Mon May 28 16:25:51 2012] Mean detx,y = (330.18, -284.36) 
[Mon May 28 16:25:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:34:50 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:34:51 2012] Setting source spectrum file to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 16:34:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 18:35:27 2012] Updating aperture counts using extracted products
[Mon May 28 18:35:27 2012] Error reading totcts from fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 18:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:35:27 2012] Using photon index=1.80, rate=3.87, arf fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1.arf
[Mon May 28 18:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:35:27 2012] Updating source flux to 3.6e-11
[Mon May 28 18:35:28 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon May 28 18:37:34 2012] Reading fit data from xmm0412980201/analysis//spectral/fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 18:37:34 2012] Spectral fit parameter nH value = 7.22782e+21
[Mon May 28 18:37:34 2012] Spectral fit parameter PhoIndex value = 7.46699
[Mon May 28 18:37:34 2012] Failed to get F(0.3-8.0) from xmm0412980201/analysis//spectral/fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 18:37:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 18:37:34 2012] Using Nh = 7.2e+21, photon index=7.47, rate=3.87, arf fullrun_mos1_xmm0412980201_pi300-10000_pass1_cl_src1.arf
[Mon May 28 18:37:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 18:37:34 2012] Updating source flux to 2.1e-11