[Mon May 13 15:11:01 2013] Detection parameters:
  Position = (344.1, 300.4) = 18 56 24.16 -37 55 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.0 +/- 27.3
  Background counts = 354.2
  Rate = 0.003 +/- 0.0005

[Mon May 13 15:11:01 2013] Off-axis axis estimate = 3.31'
[Mon May 13 15:28:29 2013] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Mon May 13 15:28:29 2013] Initial guess for spatial extent in simple fitting = 8.08"
[Mon May 13 15:28:29 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.899
[Mon May 13 15:28:29 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.08"
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src6.csv
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src6.csv
[Mon May 13 15:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon May 13 15:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 17:14:48 2013] Source 6 is offset by 0.389133 and 1.235837 pixels which is larger than
2 X fitted extent = 2.781292 x 1.064602, not incorporating fit results
[Mon May 13 17:14:48 2013] Vigneting correction estimate = 1.000000
[Mon May 13 17:14:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 17:14:48 2013] Assessing source extent using major
[Mon May 13 17:14:48 2013] Source does appear to be extended
[Mon May 13 17:14:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 17:14:48 2013] Deleting source due to low Poisson probability 0.9