[Mon May 13 15:11:01 2013] Detection parameters:
  Position = (292.7, 306.1) = 18 56 43.05 -37 55 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.4 +/- 30.4
  Background counts = 369.7
  Rate = 0.003 +/- 0.0006

[Mon May 13 15:11:01 2013] Off-axis axis estimate = 0.69'
[Mon May 13 15:28:29 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Mon May 13 15:28:29 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Mon May 13 15:28:29 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Mon May 13 15:28:29 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 6.77"
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src4.csv
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src4.csv
[Mon May 13 15:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 15:46:23 2013] fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 13 15:46:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 15:46:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 17:14:48 2013] Source 4 is offset by -6.539842 and 5.271051 pixels which is larger than
2 X fitted extent = 1.209735 x 1.209735, not incorporating fit results
[Mon May 13 17:14:48 2013] Vigneting correction estimate = 1.000000
[Mon May 13 17:14:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 17:14:48 2013] Assessing source extent using major
[Mon May 13 17:14:48 2013] Source does appear to be extended
[Mon May 13 17:14:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 17:14:48 2013] Deleting source due to low Poisson probability 0.9