[Mon May 13 15:11:46 2013] Detection parameters:
  Position = (424.4, 152.2) = 18 55 54.51 -38 6 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.6 +/- 17.8
  Background counts = 44.7
  Rate = 0.002 +/- 0.0002

[Mon May 13 15:11:47 2013] Off-axis axis estimate = 13.99'
[Mon May 13 16:18:11 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Mon May 13 16:18:11 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Mon May 13 16:18:11 2013] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.914
[Mon May 13 16:18:11 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 13.43"
[Mon May 13 17:14:45 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_src19.ximg exists
[Mon May 13 17:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_src19.csv
[Mon May 13 17:14:45 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon May 13 17:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_src19.csv
[Mon May 13 17:14:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 17:14:45 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon May 13 17:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon May 13 17:14:45 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon May 13 17:14:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Mon May 13 17:14:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 17:14:57 2013] Warning, spatial fit 19 centroid is now closest to src. 37
[Mon May 13 17:14:57 2013] Vigneting correction estimate = 1.000000
[Mon May 13 17:14:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 17:14:57 2013] Assessing source extent using major
[Mon May 13 17:14:57 2013] Source does appear to be extended
[Mon May 13 17:14:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 17:56:02 2013] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Mon May 13 17:56:02 2013] Initial guess for spatial extent in simple fitting = 13.43"
[Mon May 13 17:56:02 2013] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.914
[Mon May 13 17:56:02 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 13.43"
[Mon May 13 18:42:38 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_src18.ximg exists
[Mon May 13 18:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_src18.csv
[Mon May 13 18:42:38 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon May 13 18:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_src18.csv
[Mon May 13 18:42:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 18:42:38 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon May 13 18:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon May 13 18:42:38 2013] fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon May 13 18:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon May 13 18:42:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 18:42:48 2013] Warning, spatial fit 18 centroid is now closest to src. 37
[Mon May 13 18:42:48 2013] Vigneting correction estimate = 1.000000
[Mon May 13 18:42:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 18:42:48 2013] Assessing source extent using major
[Mon May 13 18:42:48 2013] Source does appear to be extended
[Mon May 13 18:42:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 19:38:30 2013] XMMSAS src. selection expression = ellipse(36876.041168, 13194.512665, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 19:38:30 2013] Writing source region out to fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10_src.reg
[Mon May 13 19:38:30 2013] Extracting stamp from image fullrun_mos2_xmm0412602301_pi300-10000_cl_sm2.00.img.gz, (387, 115) - (462, 190)
[Mon May 13 19:38:30 2013] XMMSAS bgd. selection expression = annulus(36876.041168, 13194.512665, 1087.500000, 2175.000000, X, Y) && !ellipse(36648.462677, 15045.644226, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 19:38:30 2013] Writing fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10.gif
[Mon May 13 19:47:20 2013] Mean detx,y = (-11662.24, -12270.69) 
[Mon May 13 19:47:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 19:47:37 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 19:47:37 2013] Setting source spectrum file to fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 13 19:47:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon May 13 20:22:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 20:22:38 2013] rmf not generated due to insufficient counts
[Mon May 13 20:32:05 2013] Updating aperture counts using extracted products
[Mon May 13 20:32:05 2013] Total counts from fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 292.00
[Mon May 13 20:32:05 2013] Total counts from fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 763.00
[Mon May 13 20:32:05 2013] Got source and background scale factors 1050434.000000, 4386633.000000
[Mon May 13 20:32:05 2013] User source parameters:
  Position = (424.4, 152.2) = 18 55 54.51 -38 6 19.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 109.3 +/- 18.1
  Background aperture counts = 182.7
  Rate = 0.001 +/- 0.0002

[Mon May 13 20:32:05 2013] Updating counts from extracted products
[Mon May 13 20:32:05 2013] Set source signif. to 109.29/13.52 = 8.09
[Mon May 13 20:32:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 20:32:07 2013] Using photon index=1.80, rate=0.00143, arf fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10.arf
[Mon May 13 20:32:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 20:32:07 2013] Updating source flux to 4.2e-14
[Mon May 13 20:32:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 20:32:18 2013] xmm0412602301/analysis//spectral/fullrun_mos2_xmm0412602301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete