[Mon May 13 15:11:23 2013] Detection parameters:
  Position = (471.5, 421.9) = 18 55 37.46 -37 46 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.5 +/- 16.0
  Background counts = 59.5
  Rate = 0.001 +/- 0.0002

[Mon May 13 15:11:24 2013] Off-axis axis estimate = 15.41'
[Mon May 13 15:46:23 2013] Using EEF radius (= 14.13 ")to estimate initial spatial extent for simple fitting
[Mon May 13 15:46:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 15:46:23 2013] Initial guess for spatial extent in simple fitting = 14.13"
[Mon May 13 15:46:23 2013] source mask rpix=3.2, npix_max = 56, mask sum = 55, frac = 0.978
[Mon May 13 15:46:23 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 14.13"
[Mon May 13 16:18:10 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_src22.ximg exists
[Mon May 13 16:18:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_src22.csv
[Mon May 13 16:18:10 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon May 13 16:18:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_src22.csv
[Mon May 13 16:18:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 16:18:11 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon May 13 16:18:11 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon May 13 16:18:11 2013] Fit fullrun_mos1_xmm0412602301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Mon May 13 17:14:52 2013] Spatial fit model total counts = 612.516000, observed total counts = 572.000000
[Mon May 13 17:14:52 2013] Offset between fit and detection position for source 13 = 5.620492 pixels
[Mon May 13 17:14:52 2013] 587.540208 total counts/ 0.019208 bgd. counts: snr = 4239.228663
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 5.620492 pixels
  Position = (475.9, 418.4) = 18 55 35.84 -37 47 3.3
  Extent = 28.3 (28.2-56.5)", rotation angle = 0
  Source counts = 587.5 +/- 24.2
  Background counts = 0.0
  Rate = 0.008 +/- 0.0003
[Mon May 13 17:14:52 2013] Vigneting correction estimate = 1.000000
[Mon May 13 17:14:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 17:14:52 2013] Assessing source extent using major axis lower bound
[Mon May 13 17:14:52 2013] Source does appear to be extended
[Mon May 13 17:14:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 17:16:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 17:16:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 17:16:52 2013] Initial guess for spatial extent in simple fitting = 28.27"
[Mon May 13 17:16:52 2013] source mask rpix=6.5, npix_max = 195, mask sum = 181, frac = 0.924
[Mon May 13 17:16:52 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 28.27"
[Mon May 13 17:56:02 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_src22.ximg exists
[Mon May 13 17:56:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_src22.csv
[Mon May 13 17:56:02 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon May 13 17:56:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_src22.csv
[Mon May 13 17:56:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 17:56:02 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon May 13 17:56:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 13 17:56:02 2013] fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon May 13 17:56:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 13 17:56:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412602301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 18:42:44 2013] Spatial fit model total counts = 2251.080000, observed total counts = 1691.000000
[Mon May 13 18:42:44 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 18:42:44 2013] Vigneting correction estimate = 1.000000
[Mon May 13 18:42:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 18:42:44 2013] Assessing source extent using major axis lower bound
[Mon May 13 18:42:44 2013] Source does appear to be extended
[Mon May 13 18:42:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 18:54:41 2013] XMMSAS src. selection expression = ellipse(41350.774000, 36353.164000, 1696.050049, 1696.050049, 0.000000, X, Y)
[Mon May 13 18:54:41 2013] Writing source region out to fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13_src.reg
[Mon May 13 18:54:41 2013] Extracting stamp from image fullrun_mos1_xmm0412602301_pi300-10000_cl_sm2.00.img.gz, (378, 321) - (573, 516)
[Mon May 13 18:54:41 2013] XMMSAS bgd. selection expression = annulus(41350.774000, 36353.164000, 2826.750081, 5653.500163, X, Y) && !ellipse(36225.778400, 35601.074200, 1974.872057, 775.602422, 201.272771, X, Y) && !ellipse(39408.013200, 36777.147600, 2186.064063, 789.880823, 5.897780, X, Y)
[Mon May 13 18:54:41 2013] Writing fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13.gif
[Mon May 13 19:04:27 2013] Mean detx,y = (11006.98, 11836.27) 
[Mon May 13 19:04:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 19:05:24 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 19:05:24 2013] Setting source spectrum file to fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon May 13 19:05:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon May 13 20:32:03 2013] Updating aperture counts using extracted products
[Mon May 13 20:32:03 2013] Total counts from fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 1263.00
[Mon May 13 20:32:03 2013] Total counts from fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13_bgd.pi.gz = 6314.00
[Mon May 13 20:32:03 2013] Got source and background scale factors 5540890.000000, 26269937.000000
[Mon May 13 20:32:03 2013] User source parameters:
  Position = (475.9, 418.4) = 18 55 35.84 -37 47 3.3
  Extent = 28.3 (28.2-56.5)", rotation angle = 0
  Source aperture counts = -68.8 +/- 36.5
  Background aperture counts = 1331.8
  Rate = -0.0009 +/- 0.0005

[Mon May 13 20:32:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 20:32:03 2013] Using photon index=1.80, rate=0.00777, arf fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13.arf
[Mon May 13 20:32:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 20:32:03 2013] Updating source flux to 1.8e-13
[Mon May 13 20:32:08 2013] Flag p found in src. 13 procflags, skipping spectral fitting
[Mon May 13 20:32:14 2013] xmm0412602301/analysis//spectral/fullrun_mos1_xmm0412602301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete