[Wed May 15 01:32:41 2013] Detection parameters:
  Position = (458.7, 217.1) = 18 55 31.61 -38 0 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.9 +/- 20.0
  Background counts = 22.3
  Rate = 0.003 +/- 0.0003

[Wed May 15 01:32:44 2013] Off-axis axis estimate = 13.03'
[Wed May 15 02:42:36 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Wed May 15 02:42:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 02:42:36 2013] Initial guess for spatial extent in simple fitting = 12.94"
[Wed May 15 02:42:36 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Wed May 15 02:42:36 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.94"
[Wed May 15 04:25:04 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src8.ximg exists
[Wed May 15 04:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src8.csv
[Wed May 15 04:25:04 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May 15 04:25:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src8.csv
[Wed May 15 04:25:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 04:25:05 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May 15 04:25:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 15 04:25:05 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May 15 04:25:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 15 04:25:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 04:25:21 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.984892 pixels away
[Wed May 15 04:25:21 2013] Vigneting correction estimate = 1.000000
[Wed May 15 04:25:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 04:25:21 2013] Assessing source extent using major
[Wed May 15 04:25:21 2013] Source does appear to be extended
[Wed May 15 04:25:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 04:54:23 2013] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Wed May 15 04:54:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 04:54:23 2013] Initial guess for spatial extent in simple fitting = 12.94"
[Wed May 15 04:54:23 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Wed May 15 04:54:23 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 12.94"
[Wed May 15 06:35:09 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass1_src8.ximg exists
[Wed May 15 06:35:09 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May 15 06:35:09 2013] Fit fullrun_mos2_xmm0412602201_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed May 15 06:35:10 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May 15 06:35:10 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May 15 06:35:10 2013] Fit fullrun_mos2_xmm0412602201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed May 15 06:35:19 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.736856 pixels away
[Wed May 15 06:35:19 2013] Vigneting correction estimate = 1.000000
[Wed May 15 06:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 06:35:19 2013] Assessing source extent using major
[Wed May 15 06:35:19 2013] Source does appear to be extended
[Wed May 15 06:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:05:44 2013] XMMSAS src. selection expression = ellipse(39857.187714, 18842.552505, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 07:05:44 2013] Writing source region out to fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3_src.reg
[Wed May 15 07:05:44 2013] Extracting stamp from image fullrun_mos2_xmm0412602201_pi300-10000_cl_sm2.00.img.gz, (421, 180) - (496, 255)
[Wed May 15 07:05:44 2013] XMMSAS bgd. selection expression = annulus(39857.187714, 18842.552505, 1087.500000, 2175.000000, X, Y) && !ellipse(40860.154236, 21274.474380, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 07:05:44 2013] Writing fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3.gif
[Wed May 15 07:10:50 2013] Mean detx,y = (15727.80, 4059.25) 
[Wed May 15 07:10:51 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 07:11:07 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 07:11:07 2013] Setting source spectrum file to fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 15 07:11:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 15 07:32:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 07:32:12 2013] rmf not generated due to insufficient counts
[Wed May 15 07:41:10 2013] Updating aperture counts using extracted products
[Wed May 15 07:41:10 2013] Total counts from fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 361.00
[Wed May 15 07:41:10 2013] Total counts from fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 751.00
[Wed May 15 07:41:10 2013] Got source and background scale factors 1340472.000000, 6115673.000000
[Wed May 15 07:41:10 2013] User source parameters:
  Position = (458.7, 217.1) = 18 55 31.61 -38 0 42.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 196.4 +/- 20.0
  Background aperture counts = 164.6
  Rate = 0.003 +/- 0.0003

[Wed May 15 07:41:10 2013] Updating counts from extracted products
[Wed May 15 07:41:10 2013] Set source signif. to 196.39/12.83 = 15.31
[Wed May 15 07:41:13 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 07:41:13 2013] Using photon index=1.80, rate=0.00267, arf fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3.arf
[Wed May 15 07:41:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 07:41:13 2013] Updating source flux to 9.9e-14
[Wed May 15 07:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 07:41:20 2013] xmm0412602201/analysis//spectral/fullrun_mos2_xmm0412602201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete