[Wed May 15 01:32:43 2013] Detection parameters:
  Position = (476.6, 261.1) = 18 55 25.08 -37 57 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.6 +/- 11.4
  Background counts = 18.9
  Rate = 0.0008 +/- 0.0002

[Wed May 15 01:32:44 2013] Off-axis axis estimate = 13.20'
[Wed May 15 02:42:36 2013] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Wed May 15 02:42:36 2013] Initial guess for spatial extent in simple fitting = 13.03"
[Wed May 15 02:42:36 2013] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.798
[Wed May 15 02:42:36 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 13.03"
[Wed May 15 04:25:05 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src35.ximg exists
[Wed May 15 04:25:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src35.csv
[Wed May 15 04:25:05 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed May 15 04:25:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src35.csv
[Wed May 15 04:25:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 04:25:05 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed May 15 04:25:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May 15 04:25:05 2013] fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May 15 04:25:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May 15 04:25:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412602201_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 04:25:21 2013] Source 27 is offset by -5.332213 and 3.228883 pixels which is larger than
2 X fitted extent = 1.488377 x 1.488377, not incorporating fit results
[Wed May 15 04:25:21 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.897494 pixels away
[Wed May 15 04:25:21 2013] Vigneting correction estimate = 1.000000
[Wed May 15 04:25:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 04:25:21 2013] Assessing source extent using major
[Wed May 15 04:25:21 2013] Source does appear to be extended
[Wed May 15 04:25:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 04:25:21 2013] Deleting source due to low Poisson probability 0.9