[Wed Jul 18 18:49:17 2012] Detection parameters:
  Position = (306.0, 315.8) = 18 56 35.84 -37 54 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63298.2 +/- 296.9
  Background counts = 62.2
  Rate = 0.6 +/- 0.003

[Wed Jul 18 18:49:18 2012] Off-axis axis estimate = 1.38'
[Wed Jul 18 22:35:42 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 22:35:42 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Wed Jul 18 22:35:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Wed Jul 18 22:35:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.12"
[Thu Jul 19 00:33:13 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 19 00:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 00:33:14 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 19 00:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 00:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 00:33:15 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 19 00:33:15 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 19 00:33:15 2012] Fit fullrun_mos2_xmm0412601501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 19 00:33:42 2012] Spatial fit model total counts = 55005.100000, observed total counts = 55005.000000
[Thu Jul 19 00:33:42 2012] Offset between fit and detection position for source 2 = 0.207326 pixels
[Thu Jul 19 00:33:42 2012] 54925.300000 total counts/ 11655.000000 bgd. counts: snr = 400.805588
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.207326 pixels
  Position = (305.9, 315.7) = 18 56 35.90 -37 54 37.2
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 43270.3 +/- 234.4
  Background counts = 11655.0
  Rate = 0.4 +/- 0.002
[Thu Jul 19 00:33:42 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 00:33:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 00:33:42 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 00:33:42 2012] Source does appear to be extended
[Thu Jul 19 00:33:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 03:06:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 03:06:01 2012] Initial guess for spatial extent in simple fitting = 5.27"
[Thu Jul 19 03:06:01 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.024
[Thu Jul 19 03:06:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.27"
[Thu Jul 19 04:00:06 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 19 04:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 04:00:06 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 19 04:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 04:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 04:00:06 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 19 04:00:06 2012] fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 19 04:00:06 2012] Fit fullrun_mos2_xmm0412601501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 19 04:00:23 2012] Spatial fit model total counts = 55119.300000, observed total counts = 55098.000000
[Thu Jul 19 04:00:23 2012] Offset between fit and detection position for source 2 = 0.011955 pixels
[Thu Jul 19 04:00:23 2012] 55261.400000 total counts/ 11869.000000 bgd. counts: snr = 398.296607
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011955 pixels
  Position = (305.9, 315.7) = 18 56 35.90 -37 54 37.2
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 43392.4 +/- 235.1
  Background counts = 11869.0
  Rate = 0.4 +/- 0.002
[Thu Jul 19 04:00:23 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:00:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:00:23 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:00:23 2012] Source does appear to be extended
[Thu Jul 19 04:00:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 06:03:45 2012] Counts = 43392.400000, rescaling region sizes by 3.000000
[Thu Jul 19 06:03:45 2012] XMMSAS src. selection expression = ellipse(26561.946060, 27415.040200, 951.343227, 951.343227, 0.000000, X, Y)
[Thu Jul 19 06:03:45 2012] Writing source region out to fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul 19 06:03:45 2012] Extracting stamp from image fullrun_mos2_xmm0412601501_pi300-10000_cl_sm2.00.img.gz, (251, 261) - (361, 370)
[Thu Jul 19 06:03:45 2012] XMMSAS bgd. selection expression = annulus(26561.946060, 27415.040200, 4756.716137, 9513.432274, X, Y) && !ellipse(16918.819168, 25971.288910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16808.027451, 18411.331940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35580.264740, 25620.981689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22782.869537, 28470.600739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20866.281800, 18041.820800, 361.320010, 361.320010, 0.000000, X, Y) && !ellipse(27965.250427, 37403.608765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26669.198760, 19442.477800, 493.632814, 493.632814, 0.000000, X, Y) && !ellipse(18670.537140, 22903.365387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21555.194611, 28543.961853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17407.444122, 22890.937195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27920.596000, 24693.502000, 1129.712033, 1129.712033, 0.000000, X, Y) && !ellipse(19415.896790, 32981.360107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27239.960000, 30322.314200, 1326.608038, 1326.608038, 0.000000, X, Y) && !ellipse(24212.621800, 26355.553200, 1152.568033, 506.891215, 332.928626, X, Y)
[Thu Jul 19 06:03:45 2012] Writing fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2.gif
[Thu Jul 19 06:03:59 2012] Mean detx,y = (31.51, -49.50) 
[Thu Jul 19 06:04:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 06:06:03 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 06:06:03 2012] Setting source spectrum file to fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 19 06:06:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul 19 06:50:46 2012] Updating aperture counts using extracted products
[Thu Jul 19 06:50:46 2012] Error reading totcts from fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 19 06:50:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 06:50:47 2012] Using photon index=1.80, rate=0.385, arf fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2.arf
[Thu Jul 19 06:50:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 06:50:47 2012] Updating source flux to 3.8e-12
[Thu Jul 19 06:54:02 2012] Reading fit data from xmm0412601501/analysis//spectral/fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2_pl.csv
[Thu Jul 19 06:54:02 2012] Spectral fit parameter nH value = 1.23873e+21
[Thu Jul 19 06:54:02 2012] Spectral fit parameter PhoIndex value = 8.59715
[Thu Jul 19 06:54:02 2012] Failed to get F(0.3-8.0) from xmm0412601501/analysis//spectral/fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Jul 19 06:54:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 06:54:02 2012] Using Nh = 1.2e+21, photon index=8.60, rate=0.385, arf fullrun_mos2_xmm0412601501_pi300-10000_pass1_cl_src2.arf
[Thu Jul 19 06:54:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 06:54:02 2012] Updating source flux to 2.7e-12