[Wed Jul 18 18:48:39 2012] Detection parameters:
  Position = (194.9, 299.0) = 18 57 16.69 -37 55 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1037.4 +/- 41.3
  Background counts = 91.8
  Rate = 0.02 +/- 0.0007

[Wed Jul 18 18:48:40 2012] Off-axis axis estimate = 7.50'
[Wed Jul 18 19:02:07 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 19:02:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 19:02:07 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Wed Jul 18 19:02:07 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Wed Jul 18 19:02:07 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.18"
[Wed Jul 18 22:35:39 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 18 22:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_src2.csv
[Wed Jul 18 22:35:39 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 18 22:35:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_src2.csv
[Wed Jul 18 22:35:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 22:35:41 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 18 22:35:41 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 18 22:35:41 2012] Fit fullrun_mos1_xmm0412601501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jul 19 00:33:33 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.328743 pixels away
[Thu Jul 19 00:33:33 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 00:33:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 00:33:33 2012] Assessing source extent using major
[Thu Jul 19 00:33:33 2012] Source does appear to be extended
[Thu Jul 19 00:33:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 00:52:30 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 00:52:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 00:52:30 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Thu Jul 19 00:52:30 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Thu Jul 19 00:52:30 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.18"
[Thu Jul 19 03:05:59 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul 19 03:05:59 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul 19 03:05:59 2012] Fit fullrun_mos1_xmm0412601501_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Jul 19 03:06:00 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul 19 03:06:00 2012] fullrun_mos1_xmm0412601501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul 19 03:06:00 2012] Fit fullrun_mos1_xmm0412601501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jul 19 04:00:16 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.328743 pixels away
[Thu Jul 19 04:00:16 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:00:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:00:16 2012] Assessing source extent using major
[Thu Jul 19 04:00:16 2012] Source does appear to be extended
[Thu Jul 19 04:00:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:37:00 2012] Counts = 1037.373779, rescaling region sizes by 2.000000
[Thu Jul 19 04:37:00 2012] XMMSAS src. selection expression = ellipse(16910.017746, 25968.209076, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jul 19 04:37:00 2012] Writing source region out to fullrun_mos1_xmm0412601501_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 19 04:37:00 2012] Extracting stamp from image fullrun_mos1_xmm0412601501_pi300-10000_cl_sm2.00.img.gz, (120, 224) - (270, 374)
[Thu Jul 19 04:37:00 2012] XMMSAS bgd. selection expression = annulus(16910.017746, 25968.209076, 4350.000000, 8700.000000, X, Y) && !ellipse(26561.628800, 27415.895000, 1283.018437, 1283.018437, 0.000000, X, Y) && !ellipse(16765.923996, 18399.847610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22796.968800, 28432.685800, 382.187211, 382.187211, 0.000000, X, Y) && !ellipse(13234.806717, 19273.523499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13847.303391, 23085.418091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12337.259460, 20855.254547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25640.562531, 29570.807709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12031.693466, 33171.733673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9989.313507, 30387.316833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12925.718826, 27320.659760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14679.275406, 32319.902039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11929.013400, 30334.046000, 2002.824058, 2002.824058, 0.000000, X, Y) && !ellipse(18617.457794, 31031.875641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20291.880000, 29039.531600, 1405.120040, 1405.120040, 0.000000, X, Y) && !ellipse(22698.885651, 27820.625671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21701.733600, 27888.900340, 1392.464040, 1392.464040, 0.000000, X, Y) && !ellipse(21823.516000, 31143.860000, 1475.784042, 1475.784042, 0.000000, X, Y)
[Thu Jul 19 04:37:00 2012] Writing fullrun_mos1_xmm0412601501_pi300-10000_pass1_cl_src1.gif
[Thu Jul 19 04:39:24 2012] Mean detx,y = (-2655.97, -9619.21) 
[Thu Jul 19 04:39:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 04:41:02 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 04:41:02 2012] Setting source spectrum file to fullrun_mos1_xmm0412601501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 19 04:41:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412601501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 19 05:05:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 05:05:24 2012] rmf not generated due to insufficient counts
[Thu Jul 19 06:50:45 2012] Updating aperture counts using extracted products
[Thu Jul 19 06:50:45 2012] Error reading totcts from fullrun_mos1_xmm0412601501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 19 06:50:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 06:50:46 2012] Using photon index=1.80, rate=0.0167, arf fullrun_mos1_xmm0412601501_pi300-10000_pass1_cl_src1.arf
[Thu Jul 19 06:50:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 06:50:46 2012] Updating source flux to 2.7e-13
[Thu Jul 19 06:50:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting