[Thu May 17 10:55:51 2012] Detection parameters:
  Position = (130.1, 197.2) = 18 57 32.10 -38 1 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 17.6
  Background counts = 56.2
  Rate = 0.002 +/- 0.0003

[Thu May 17 10:55:51 2012] Off-axis axis estimate = 14.24'
[Thu May 17 11:44:14 2012] Using EEF radius (= 13.55 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:44:14 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Thu May 17 11:44:14 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.071
[Thu May 17 11:44:14 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 13.55"
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src17.ximg exists
[Thu May 17 13:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src17.csv
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu May 17 13:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src17.csv
[Thu May 17 13:10:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu May 17 13:10:49 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu May 17 13:11:01 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 17.419520 pixels away
[Thu May 17 13:11:01 2012] Vigneting correction estimate = 1.000000
[Thu May 17 13:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 13:11:01 2012] Assessing source extent using major
[Thu May 17 13:11:01 2012] Source does appear to be extended
[Thu May 17 13:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:19:53 2012] Using EEF radius (= 13.55 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:19:53 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Thu May 17 13:19:53 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.071
[Thu May 17 13:19:53 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 13.55"
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src17.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src17.csv
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src17.csv
[Thu May 17 14:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src17.csv
[Thu May 17 14:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:16:57 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 17.363893 pixels away
[Thu May 17 14:16:57 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:16:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:16:57 2012] Assessing source extent using major
[Thu May 17 14:16:57 2012] Source does appear to be extended
[Thu May 17 14:16:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:41:35 2012] XMMSAS src. selection expression = ellipse(11266.665359, 17111.258347, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 17 14:41:35 2012] Writing source region out to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src23_src.reg
[Thu May 17 14:41:35 2012] Extracting stamp from image fullrun_mos2_xmm0412601401_pi300-10000_cl_sm2.00.img.gz, (93, 160) - (168, 235)
[Thu May 17 14:41:35 2012] XMMSAS bgd. selection expression = annulus(11266.665359, 17111.258347, 1087.500000, 2175.000000, X, Y)
[Thu May 17 14:41:35 2012] Writing fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src23.gif
[Thu May 17 14:55:42 2012] Mean detx,y = (-12354.15, 8794.13) 
[Thu May 17 14:55:44 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 14:56:21 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 14:56:22 2012] Setting source spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu May 17 14:56:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu May 17 15:33:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 17 15:33:47 2012] rmf not generated due to insufficient counts
[Thu May 17 15:36:16 2012] Updating aperture counts using extracted products
[Thu May 17 15:36:16 2012] Error reading totcts from fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu May 17 15:36:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:36:17 2012] Using photon index=1.80, rate=0.00201, arf fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src23.arf
[Thu May 17 15:36:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:36:17 2012] Updating source flux to 5e-14
[Thu May 17 15:36:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting