[Thu May 17 10:55:50 2012] Detection parameters:
  Position = (172.3, 274.2) = 18 57 16.48 -37 55 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 632.7 +/- 32.7
  Background counts = 63.9
  Rate = 0.02 +/- 0.0009

[Thu May 17 10:55:51 2012] Off-axis axis estimate = 9.31'
[Thu May 17 11:44:14 2012] Using EEF radius (= 11.08 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:44:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 17 11:44:14 2012] Initial guess for spatial extent in simple fitting = 11.08"
[Thu May 17 11:44:14 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.969
[Thu May 17 11:44:14 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.08"
[Thu May 17 13:10:48 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 17 13:10:48 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 17 13:10:48 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 17 13:10:49 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 17 13:11:01 2012] Spatial fit model total counts = 967.999000, observed total counts = 968.000000
[Thu May 17 13:11:01 2012] Offset between fit and detection position for source 2 = 0.175018 pixels
[Thu May 17 13:11:01 2012] 967.220000 total counts/ 582.000000 bgd. counts: snr = 15.967883
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.175018 pixels
  Position = (172.4, 274.3) = 18 57 16.47 -37 55 47.7
  Extent = 5.4 (4.8-6.0)", rotation angle = 0
  Source counts = 385.2 +/- 31.1
  Background counts = 582.0
  Rate = 0.007 +/- 0.0006
[Thu May 17 13:11:01 2012] Vigneting correction estimate = 1.000000
[Thu May 17 13:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 13:11:01 2012] Assessing source extent using major axis lower bound
[Thu May 17 13:11:01 2012] Source does appear to be extended
[Thu May 17 13:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:19:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 13:19:53 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Thu May 17 13:19:53 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.747
[Thu May 17 13:19:53 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.37"
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src2.csv
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src2.csv
[Thu May 17 14:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 17 14:16:47 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 17 14:16:57 2012] Spatial fit model total counts = 967.390000, observed total counts = 968.000000
[Thu May 17 14:16:57 2012] Offset between fit and detection position for source 2 = 0.000567 pixels
[Thu May 17 14:16:57 2012] 966.572000 total counts/ 580.328000 bgd. counts: snr = 16.033376
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000567 pixels
  Position = (172.4, 274.3) = 18 57 16.47 -37 55 47.7
  Extent = 5.4 (4.8-6.0)", rotation angle = 0
  Source counts = 386.2 +/- 31.1
  Background counts = 580.3
  Rate = 0.007 +/- 0.0006
[Thu May 17 14:16:57 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:16:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:16:57 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:16:57 2012] Source does appear to be extended
[Thu May 17 14:16:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:41:35 2012] XMMSAS src. selection expression = ellipse(14946.912000, 23819.286200, 324.544209, 324.544209, 0.000000, X, Y)
[Thu May 17 14:41:35 2012] Writing source region out to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src2_src.reg
[Thu May 17 14:41:35 2012] Extracting stamp from image fullrun_mos2_xmm0412601401_pi300-10000_cl_sm2.00.img.gz, (154, 256) - (191, 293)
[Thu May 17 14:41:35 2012] XMMSAS bgd. selection expression = annulus(14946.912000, 23819.286200, 540.907016, 1081.814031, X, Y)
[Thu May 17 14:41:35 2012] Writing fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src2.gif
[Thu May 17 14:46:33 2012] Mean detx,y = (-9465.57, 1707.62) 
[Thu May 17 14:46:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 14:46:50 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 14:46:50 2012] Setting source spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 14:46:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 17 15:36:15 2012] Updating aperture counts using extracted products
[Thu May 17 15:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 17 15:36:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:36:16 2012] Using photon index=1.80, rate=0.00715, arf fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src2.arf
[Thu May 17 15:36:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:36:16 2012] Updating source flux to 1.4e-13