[Thu May 17 10:55:51 2012] Detection parameters:
  Position = (387.1, 270.1) = 18 55 57.51 -37 56 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.2 +/- 15.5
  Background counts = 59.5
  Rate = 0.002 +/- 0.0005

[Thu May 17 10:55:51 2012] Off-axis axis estimate = 6.75'
[Thu May 17 11:44:14 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:44:14 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Thu May 17 11:44:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.187
[Thu May 17 11:44:14 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.80"
[Thu May 17 13:10:48 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 17 13:10:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src11.csv
[Thu May 17 13:10:48 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 17 13:10:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src11.csv
[Thu May 17 13:10:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 17 13:10:49 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 17 13:11:01 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.477972 pixels away
[Thu May 17 13:11:01 2012] Vigneting correction estimate = 1.000000
[Thu May 17 13:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 13:11:01 2012] Assessing source extent using major
[Thu May 17 13:11:01 2012] Source does appear to be extended
[Thu May 17 13:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:19:53 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Thu May 17 13:19:53 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Thu May 17 13:19:53 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.187
[Thu May 17 13:19:53 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.80"
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src11.csv
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src11.csv
[Thu May 17 14:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 17 14:16:47 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May 17 14:16:57 2012] Spatial fit model total counts = 438.563000, observed total counts = 439.000000
[Thu May 17 14:16:57 2012] Offset between fit and detection position for source 18 = 0.443191 pixels
[Thu May 17 14:16:57 2012] 437.701100 total counts/ 369.967000 bgd. counts: snr = 3.521485
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.443191 pixels
  Position = (387.4, 270.4) = 18 55 57.40 -37 56 5.3
  Extent = 8.5 (3.8-16.4)", rotation angle = 0
  Source counts = 67.7 +/- 20.9
  Background counts = 370.0
  Rate = 0.001 +/- 0.0004
[Thu May 17 14:16:57 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:16:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:16:57 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:16:57 2012] Source does appear to be extended
[Thu May 17 14:16:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:41:35 2012] XMMSAS src. selection expression = ellipse(33657.995800, 23473.309800, 512.314215, 512.314215, 0.000000, X, Y)
[Thu May 17 14:41:35 2012] Writing source region out to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src18_src.reg
[Thu May 17 14:41:35 2012] Extracting stamp from image fullrun_mos2_xmm0412601401_pi300-10000_cl_sm2.00.img.gz, (358, 241) - (417, 300)
[Thu May 17 14:41:35 2012] XMMSAS bgd. selection expression = annulus(33657.995800, 23473.309800, 853.857025, 1707.714049, X, Y)
[Thu May 17 14:41:35 2012] Writing fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src18.gif
[Thu May 17 14:51:27 2012] Mean detx,y = (9159.32, -99.00) 
[Thu May 17 14:51:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 14:51:45 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 14:51:46 2012] Setting source spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 17 14:51:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu May 17 15:31:47 2012] Not generating rmf since there are only 67 counts
[Thu May 17 15:31:47 2012] rmf not generated due to insufficient counts
[Thu May 17 15:36:15 2012] Updating aperture counts using extracted products
[Thu May 17 15:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu May 17 15:36:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:36:17 2012] Using photon index=1.80, rate=0.00125, arf fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src18.arf
[Thu May 17 15:36:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:36:17 2012] Updating source flux to 2.3e-14
[Thu May 17 15:36:33 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting