[Thu May 17 10:55:51 2012] Detection parameters:
  Position = (283.3, 308.1) = 18 56 35.66 -37 53 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.5 +/- 16.6
  Background counts = 81.9
  Rate = 0.001 +/- 0.0003

[Thu May 17 10:55:51 2012] Off-axis axis estimate = 1.30'
[Thu May 17 11:44:14 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:44:14 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Thu May 17 11:44:14 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.663
[Thu May 17 11:44:14 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.08"
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src20.ximg exists
[Thu May 17 13:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src20.csv
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu May 17 13:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src20.csv
[Thu May 17 13:10:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu May 17 13:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May 17 13:10:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu May 17 13:10:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 13:11:01 2012] Source 14 is offset by -5.072118 and -5.290214 pixels which is larger than
2 X fitted extent = 4.984506 x 0.836731, not incorporating fit results
[Thu May 17 13:11:01 2012] Vigneting correction estimate = 1.000000
[Thu May 17 13:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 13:11:01 2012] Assessing source extent using major
[Thu May 17 13:11:01 2012] Source does appear to be extended
[Thu May 17 13:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:11:01 2012] Deleting source due to low Poisson probability 1.0