[Thu May 17 10:55:50 2012] Detection parameters:
  Position = (283.2, 290.9) = 18 56 35.73 -37 54 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32138.7 +/- 214.3
  Background counts = 70.1
  Rate = 0.6 +/- 0.004

[Thu May 17 10:55:51 2012] Off-axis axis estimate = 1.23'
[Thu May 17 11:44:14 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Thu May 17 11:44:14 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Thu May 17 11:44:14 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.723
[Thu May 17 11:44:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.05"
[Thu May 17 13:10:48 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 17 13:10:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src1.csv
[Thu May 17 13:10:48 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 17 13:10:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src1.csv
[Thu May 17 13:10:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 17 13:10:49 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 17 13:10:49 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 17 13:11:01 2012] Spatial fit model total counts = 25877.200000, observed total counts = 25379.000000
[Thu May 17 13:11:01 2012] Offset between fit and detection position for source 1 = 0.293498 pixels
[Thu May 17 13:11:01 2012] 25823.660000 total counts/ 6362.460000 bgd. counts: snr = 243.981605
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.293498 pixels
  Position = (283.3, 290.6) = 18 56 35.68 -37 54 37.5
  Extent = 4.5 (4.5-4.6)", rotation angle = 0
  Source counts = 19461.2 +/- 160.7
  Background counts = 6362.5
  Rate = 0.4 +/- 0.003
[Thu May 17 13:11:01 2012] Vigneting correction estimate = 1.000000
[Thu May 17 13:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 13:11:01 2012] Assessing source extent using major axis lower bound
[Thu May 17 13:11:01 2012] Source does appear to be extended
[Thu May 17 13:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 13:19:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 17 13:19:53 2012] Initial guess for spatial extent in simple fitting = 4.50"
[Thu May 17 13:19:53 2012] source mask rpix=1.0, npix_max = 9, mask sum = 6, frac = 0.637
[Thu May 17 13:19:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.50"
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src1.csv
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 17 14:16:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src1.csv
[Thu May 17 14:16:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 17 14:16:47 2012] fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 17 14:16:47 2012] Fit fullrun_mos2_xmm0412601401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 17 14:16:57 2012] Spatial fit model total counts = 25715.500000, observed total counts = 25394.000000
[Thu May 17 14:16:57 2012] Offset between fit and detection position for source 1 = 0.008254 pixels
[Thu May 17 14:16:57 2012] 25825.660000 total counts/ 6334.960000 bgd. counts: snr = 244.881230
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008254 pixels
  Position = (283.3, 290.6) = 18 56 35.68 -37 54 37.5
  Extent = 4.5 (4.5-4.6)", rotation angle = 0
  Source counts = 19490.7 +/- 160.7
  Background counts = 6335.0
  Rate = 0.4 +/- 0.003
[Thu May 17 14:16:57 2012] Vigneting correction estimate = 1.000000
[Thu May 17 14:16:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 17 14:16:57 2012] Assessing source extent using major axis lower bound
[Thu May 17 14:16:57 2012] Source does appear to be extended
[Thu May 17 14:16:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 14:41:35 2012] Counts = 19490.700000, rescaling region sizes by 3.000000
[Thu May 17 14:41:35 2012] XMMSAS src. selection expression = ellipse(24599.403800, 25235.431600, 814.854623, 814.854623, 0.000000, X, Y)
[Thu May 17 14:41:35 2012] Writing source region out to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1_src.reg
[Thu May 17 14:41:35 2012] Extracting stamp from image fullrun_mos2_xmm0412601401_pi300-10000_cl_sm2.00.img.gz, (236, 244) - (330, 337)
[Thu May 17 14:41:35 2012] XMMSAS bgd. selection expression = annulus(24599.403800, 25235.431600, 4074.273117, 8148.546234, X, Y) && !ellipse(24715.977783, 17379.733582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16727.451294, 20740.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17449.620590, 30676.505280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32038.864532, 20573.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23855.421722, 24756.140411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.834351, 25968.047119, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 17 14:41:35 2012] Writing fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1.gif
[Thu May 17 14:41:50 2012] Mean detx,y = (-27.99, -801.36) 
[Thu May 17 14:41:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 14:46:24 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 14:46:25 2012] Setting source spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 14:46:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 17 15:36:14 2012] Updating aperture counts using extracted products
[Thu May 17 15:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 17 15:36:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:36:16 2012] Using photon index=1.80, rate=0.361, arf fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1.arf
[Thu May 17 15:36:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:36:16 2012] Updating source flux to 3.7e-12
[Thu May 17 15:37:35 2012] Reading fit data from xmm0412601401/analysis//spectral/fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 17 15:37:35 2012] Spectral fit parameter nH value = 1.43138e+21
[Thu May 17 15:37:35 2012] Spectral fit parameter PhoIndex value = 8.80592
[Thu May 17 15:37:35 2012] Failed to get F(0.3-8.0) from xmm0412601401/analysis//spectral/fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 17 15:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 15:37:35 2012] Using Nh = 1.4e+21, photon index=8.81, rate=0.361, arf fullrun_mos2_xmm0412601401_pi300-10000_pass1_cl_src1.arf
[Thu May 17 15:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 15:37:35 2012] Updating source flux to 2.6e-12