[Sat Feb 25 17:29:54 2012] Detection parameters:
  Position = (301.7, 274.2) = 18 56 28.99 -37 55 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.0 +/- 47.2
  Background counts = 1004.7
  Rate = 0.006 +/- 0.0009

[Sat Feb 25 17:29:54 2012] Off-axis axis estimate = 1.77'
[Sat Feb 25 17:57:50 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:57:50 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Sat Feb 25 17:57:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Sat Feb 25 17:57:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Sat Feb 25 18:32:16 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Feb 25 18:32:16 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Feb 25 18:32:16 2012] Fit fullrun_pn_xmm0412601301_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Feb 25 18:32:16 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 25 18:32:16 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 25 18:32:16 2012] Fit fullrun_pn_xmm0412601301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 25 21:05:51 2012] Spatial fit model total counts = 8727.170000, observed total counts = 9042.000000
[Sat Feb 25 21:05:51 2012] Offset between fit and detection position for source 1 = 2.567358 pixels
[Sat Feb 25 21:05:51 2012] 8958.820000 total counts/ 5025.540000 bgd. counts: snr = 55.483455
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.567358 pixels
  Position = (303.7, 272.6) = 18 56 28.26 -37 55 54.6
  Extent = 14.6 (14.5-29.3)", rotation angle = 0
  Source counts = 3933.3 +/- 94.7
  Background counts = 5025.5
  Rate = 0.05 +/- 0.001
[Sat Feb 25 21:05:51 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 21:05:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 21:05:51 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 21:05:51 2012] Source does appear to be extended
[Sat Feb 25 21:05:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 21:06:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 21:06:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 25 21:06:16 2012] Initial guess for spatial extent in simple fitting = 14.63"
[Sat Feb 25 21:06:16 2012] source mask rpix=3.4, npix_max = 59, mask sum = 49, frac = 0.821
[Sat Feb 25 21:06:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.63"
[Sat Feb 25 21:38:10 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Feb 25 21:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_src1.csv
[Sat Feb 25 21:38:10 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Feb 25 21:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_src1.csv
[Sat Feb 25 21:38:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 21:38:10 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 25 21:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Feb 25 21:38:10 2012] fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 25 21:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Feb 25 21:38:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412601301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 23:26:44 2012] Spatial fit model total counts = 6729.440000, observed total counts = 15340.000000
[Sat Feb 25 23:26:44 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Feb 25 23:26:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 23:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 23:26:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 23:26:44 2012] Source does appear to be extended
[Sat Feb 25 23:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 23:27:06 2012] Counts = 3933.280000, rescaling region sizes by 2.000000
[Sat Feb 25 23:27:06 2012] XMMSAS src. selection expression = ellipse(26372.284000, 23665.502000, 1755.708051, 1755.708051, 0.000000, X, Y)
[Sat Feb 25 23:27:06 2012] Writing source region out to fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1_src.reg
[Sat Feb 25 23:27:06 2012] Extracting stamp from image fullrun_pn_xmm0412601301_pi300-10000_cl_sm2.00.img.gz, (203, 172) - (405, 373)
[Sat Feb 25 23:27:06 2012] XMMSAS bgd. selection expression = annulus(26372.284000, 23665.502000, 5852.360168, 11704.720337, X, Y) && !ellipse(26596.887600, 24611.518400, 1123.448032, 466.191213, 90.000000, X, Y) && !ellipse(23197.001007, 24389.895050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22605.116000, 24111.034000, 1235.592036, 1235.592036, 0.000000, X, Y) && !ellipse(24612.271600, 25202.777800, 1489.778443, 1468.857642, 41.733356, X, Y)
[Sat Feb 25 23:27:06 2012] Writing fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1.gif
[Sat Feb 25 23:40:10 2012] Mean detx,y = (-1050.67, -80.90) 
[Sat Feb 25 23:40:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 23:43:19 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 23:43:20 2012] Setting source spectrum file to fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Feb 25 23:43:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 26 04:48:54 2012] Updating aperture counts using extracted products
[Sun Feb 26 04:48:54 2012] Error reading totcts from fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 04:48:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 04:48:55 2012] Using photon index=1.80, rate=0.0483, arf fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 04:48:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 04:48:55 2012] Updating source flux to 1.6e-13
[Sun Feb 26 04:55:28 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sun Feb 26 04:57:14 2012] Reading fit data from xmm0412601301/analysis//spectral/fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Feb 26 04:57:14 2012] Spectral fit parameter nH value = 514808000000.0
[Sun Feb 26 04:57:14 2012] Spectral fit parameter PhoIndex value = 3.92065
[Sun Feb 26 04:57:14 2012] Failed to get F(0.3-8.0) from xmm0412601301/analysis//spectral/fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 26 04:57:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 04:57:14 2012] Using Nh = 5.1e+11, photon index=3.92, rate=0.0483, arf fullrun_pn_xmm0412601301_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 04:57:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 04:57:14 2012] Updating source flux to 7.9e-14