[Wed Feb 22 19:02:19 2012] Detection parameters:
  Position = (400.7, 262.9) = 18 56 4.54 -37 58 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.3 +/- 13.5
  Background counts = 24.0
  Rate = 0.001 +/- 0.0002

[Wed Feb 22 19:02:20 2012] Off-axis axis estimate = 7.85'
[Wed Feb 22 19:43:33 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 19:43:33 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Wed Feb 22 19:43:33 2012] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.964
[Wed Feb 22 19:43:33 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.35"
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src19.ximg exists
[Wed Feb 22 21:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src19.csv
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Feb 22 21:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src19.csv
[Wed Feb 22 21:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Feb 22 21:00:01 2012] Fit fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Feb 22 22:42:09 2012] Spatial fit model total counts = 406.668000, observed total counts = 406.000000
[Wed Feb 22 22:42:09 2012] Offset between fit and detection position for source 26 = 5.609471 pixels
[Wed Feb 22 22:42:09 2012] 391.288000 total counts/ 267.773000 bgd. counts: snr = 7.548077
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.609471 pixels
  Position = (405.5, 265.8) = 18 56 2.78 -37 58 18.6
  Extent = 20.7 (20.7-41.4)", rotation angle = 0
  Source counts = 123.5 +/- 19.8
  Background counts = 267.8
  Rate = 0.002 +/- 0.0003
[Wed Feb 22 22:42:09 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 22:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 22:42:09 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 22:42:09 2012] Source does appear to be extended
[Wed Feb 22 22:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 22:44:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:44:56 2012] Initial guess for spatial extent in simple fitting = 20.71"
[Wed Feb 22 22:44:56 2012] source mask rpix=4.8, npix_max = 110, mask sum = 105, frac = 0.949
[Wed Feb 22 22:44:56 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 20.71"
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src19.csv
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src19.csv
[Wed Feb 22 23:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Feb 22 23:41:29 2012] Fit fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Feb 23 00:29:21 2012] Source 26 is offset by 4.757678 and 2.948807 pixels which is larger than
2 X fitted extent = 3.410966 x 3.410966, not incorporating fit results
[Thu Feb 23 00:29:21 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 00:29:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 00:29:21 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 00:29:21 2012] Source does appear to be extended
[Thu Feb 23 00:29:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 00:41:31 2012] XMMSAS src. selection expression = ellipse(35229.484000, 23076.978200, 1242.366036, 1242.366036, 0.000000, X, Y)
[Thu Feb 23 00:41:31 2012] Writing source region out to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src26_src.reg
[Thu Feb 23 00:41:31 2012] Extracting stamp from image fullrun_mos1_xmm0412601101_pi300-10000_cl_sm2.00.img.gz, (334, 194) - (477, 337)
[Thu Feb 23 00:41:31 2012] XMMSAS bgd. selection expression = annulus(35229.484000, 23076.978200, 2070.610060, 4141.220119, X, Y) && !ellipse(39522.017600, 22762.560200, 462.512013, 462.512013, 0.000000, X, Y) && !ellipse(36387.584808, 25642.726379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37481.894958, 19098.092438, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 23 00:41:31 2012] Writing fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src26.gif
[Thu Feb 23 00:53:58 2012] Mean detx,y = (-3086.06, 8225.76) 
[Thu Feb 23 00:54:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 00:55:06 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 00:55:06 2012] Setting source spectrum file to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Feb 23 00:55:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Feb 23 02:20:56 2012] Updating aperture counts using extracted products
[Thu Feb 23 02:20:56 2012] Error reading totcts from fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Feb 23 02:20:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 02:20:58 2012] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src26.arf
[Thu Feb 23 02:20:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 02:20:58 2012] Updating source flux to 2.1e-14
[Thu Feb 23 02:21:02 2012] Flag b found in src. 26 procflags, skipping spectral fitting