[Wed Feb 22 19:02:19 2012] Detection parameters:
  Position = (304.5, 318.5) = 18 56 39.92 -37 54 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.0 +/- 18.2
  Background counts = 39.7
  Rate = 0.001 +/- 0.0003

[Wed Feb 22 19:02:20 2012] Off-axis axis estimate = 1.52'
[Wed Feb 22 19:43:33 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 19:43:33 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Wed Feb 22 19:43:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.971
[Wed Feb 22 19:43:33 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.19"
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src13.ximg exists
[Wed Feb 22 21:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src13.csv
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Feb 22 21:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src13.csv
[Wed Feb 22 21:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Feb 22 21:00:01 2012] Fit fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Feb 22 22:42:09 2012] Source 21 is offset by -6.088694 and 2.142951 pixels which is larger than
2 X fitted extent = 5.683127 x 5.683127, not incorporating fit results
[Wed Feb 22 22:42:09 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 22:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 22:42:09 2012] Assessing source extent using major
[Wed Feb 22 22:42:09 2012] Source does appear to be extended
[Wed Feb 22 22:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 22:44:56 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:44:56 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Wed Feb 22 22:44:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.971
[Wed Feb 22 22:44:56 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.19"
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src13.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src13.csv
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src13.csv
[Wed Feb 22 23:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Feb 22 23:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 00:29:21 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 31.547720 pixels away
[Thu Feb 23 00:29:21 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 00:29:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 00:29:21 2012] Assessing source extent using major
[Thu Feb 23 00:29:21 2012] Source does appear to be extended
[Thu Feb 23 00:29:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 00:41:31 2012] XMMSAS src. selection expression = ellipse(26444.903656, 27662.048737, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 23 00:41:31 2012] Writing source region out to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src21_src.reg
[Thu Feb 23 00:41:31 2012] Extracting stamp from image fullrun_mos1_xmm0412601101_pi300-10000_cl_sm2.00.img.gz, (267, 281) - (342, 356)
[Thu Feb 23 00:41:31 2012] XMMSAS bgd. selection expression = annulus(26444.903656, 27662.048737, 1087.500000, 2175.000000, X, Y) && !ellipse(27384.300200, 27488.500800, 1279.874437, 1279.874437, 0.000000, X, Y)
[Thu Feb 23 00:41:31 2012] Writing fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src21.gif
[Thu Feb 23 00:50:08 2012] Mean detx,y = (380.79, -792.19) 
[Thu Feb 23 00:50:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 00:50:21 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 00:50:21 2012] Setting source spectrum file to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Feb 23 00:50:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Feb 23 01:22:00 2012] Not generating rmf since there are only 87 counts
[Thu Feb 23 01:22:00 2012] rmf not generated due to insufficient counts
[Thu Feb 23 02:20:56 2012] Updating aperture counts using extracted products
[Thu Feb 23 02:20:56 2012] Error reading totcts from fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Feb 23 02:20:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 02:20:57 2012] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src21.arf
[Thu Feb 23 02:20:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 02:20:58 2012] Updating source flux to 1.6e-14
[Thu Feb 23 02:21:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting