[Wed Feb 22 19:02:19 2012] Detection parameters:
  Position = (151.5, 241.7) = 18 57 36.22 -38 0 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.7 +/- 14.0
  Background counts = 24.3
  Rate = 0.001 +/- 0.0002

[Wed Feb 22 19:02:20 2012] Off-axis axis estimate = 11.42'
[Wed Feb 22 19:43:33 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 19:43:33 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Wed Feb 22 19:43:33 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.132
[Wed Feb 22 19:43:33 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.14"
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Feb 22 21:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src14.csv
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Feb 22 21:00:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src14.csv
[Wed Feb 22 21:00:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Feb 22 21:00:01 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Feb 22 21:00:01 2012] Fit fullrun_mos1_xmm0412601101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Feb 22 22:42:09 2012] Spatial fit model total counts = 413.467000, observed total counts = 414.000000
[Wed Feb 22 22:42:09 2012] Offset between fit and detection position for source 12 = 3.857641 pixels
[Wed Feb 22 22:42:09 2012] 406.726000 total counts/ 116.294000 bgd. counts: snr = 26.931827
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.857641 pixels
  Position = (155.4, 241.3) = 18 57 34.81 -38 0 5.1
  Extent = 24.3 (24.2-48.5)", rotation angle = 0
  Source counts = 290.4 +/- 20.2
  Background counts = 116.3
  Rate = 0.004 +/- 0.0003
[Wed Feb 22 22:42:09 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 22:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 22:42:09 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 22:42:09 2012] Source does appear to be extended
[Wed Feb 22 22:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 22:44:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:44:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 22:44:56 2012] Initial guess for spatial extent in simple fitting = 24.27"
[Wed Feb 22 22:44:56 2012] source mask rpix=5.6, npix_max = 147, mask sum = 144, frac = 0.974
[Wed Feb 22 22:44:56 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 24.27"
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src14.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src14.csv
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Feb 22 23:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src14.csv
[Wed Feb 22 23:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Feb 22 23:41:29 2012] fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Feb 22 23:41:29 2012] Fit fullrun_mos1_xmm0412601101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Feb 23 00:29:21 2012] Warning, spatial fit 14 centroid is now closest to src. 25
[Thu Feb 23 00:29:21 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 00:29:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 00:29:21 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 00:29:21 2012] Source does appear to be extended
[Thu Feb 23 00:29:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 00:41:31 2012] XMMSAS src. selection expression = ellipse(13468.982000, 20941.489400, 1456.332042, 1456.332042, 0.000000, X, Y)
[Thu Feb 23 00:41:31 2012] Writing source region out to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src12_src.reg
[Thu Feb 23 00:41:31 2012] Extracting stamp from image fullrun_mos1_xmm0412601101_pi300-10000_cl_sm2.00.img.gz, (72, 158) - (239, 325)
[Thu Feb 23 00:41:31 2012] XMMSAS bgd. selection expression = annulus(13468.982000, 20941.489400, 2427.220070, 4854.440140, X, Y) && !ellipse(17719.663620, 26054.301056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17583.003952, 18494.117081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14659.328171, 23174.589905, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 23 00:41:31 2012] Writing fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src12.gif
[Thu Feb 23 00:50:25 2012] Mean detx,y = (-7886.21, -13073.16) 
[Thu Feb 23 00:50:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 00:51:05 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 00:51:06 2012] Setting source spectrum file to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Feb 23 00:51:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Feb 23 02:20:56 2012] Updating aperture counts using extracted products
[Thu Feb 23 02:20:56 2012] Error reading totcts from fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Feb 23 02:20:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 02:20:58 2012] Using photon index=1.80, rate=0.00422, arf fullrun_mos1_xmm0412601101_pi300-10000_pass1_cl_src12.arf
[Thu Feb 23 02:20:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 02:20:58 2012] Updating source flux to 1e-13