[Thu Jul  5 08:05:26 2012] Detection parameters:
  Position = (312.5, 315.1) = 18 56 35.76 -37 54 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37287.5 +/- 235.7
  Background counts = 145.7
  Rate = 0.6 +/- 0.004

[Thu Jul  5 08:05:26 2012] Off-axis axis estimate = 1.58'
[Thu Jul  5 08:09:09 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 08:09:09 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Thu Jul  5 08:09:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.911
[Thu Jul  5 08:09:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Thu Jul  5 08:20:57 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 08:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 08:20:57 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 08:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 08:20:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 08:20:57 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 08:20:57 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 08:20:57 2012] Fit fullrun_mos1_xmm0412600801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 08:49:36 2012] Spatial fit model total counts = 24353.200000, observed total counts = 26781.000000
[Thu Jul  5 08:49:36 2012] Offset between fit and detection position for source 1 = 0.763234 pixels
[Thu Jul  5 08:49:36 2012] 24416.920000 total counts/ 5517.120000 bgd. counts: snr = 254.449144
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.763234 pixels
  Position = (312.4, 315.9) = 18 56 35.83 -37 54 38.3
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 18899.8 +/- 156.3
  Background counts = 5517.1
  Rate = 0.3 +/- 0.003
[Thu Jul  5 08:49:36 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 08:49:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 08:49:36 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 08:49:36 2012] Source does appear to be extended
[Thu Jul  5 08:49:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 08:50:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 08:50:32 2012] Initial guess for spatial extent in simple fitting = 5.97"
[Thu Jul  5 08:50:32 2012] source mask rpix=1.4, npix_max = 14, mask sum = 10, frac = 0.712
[Thu Jul  5 08:50:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.97"
[Thu Jul  5 09:04:01 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 09:04:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 09:04:01 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 09:04:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 09:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 09:04:01 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 09:04:01 2012] fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 09:04:01 2012] Fit fullrun_mos1_xmm0412600801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 09:23:36 2012] Spatial fit model total counts = 24364.800000, observed total counts = 26753.000000
[Thu Jul  5 09:23:36 2012] Offset between fit and detection position for source 1 = 0.013720 pixels
[Thu Jul  5 09:23:36 2012] 24354.250000 total counts/ 5446.250000 bgd. counts: snr = 256.210431
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013720 pixels
  Position = (312.4, 315.9) = 18 56 35.83 -37 54 38.3
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 18908.0 +/- 156.1
  Background counts = 5446.2
  Rate = 0.3 +/- 0.003
[Thu Jul  5 09:23:36 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 09:23:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 09:23:36 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 09:23:36 2012] Source does appear to be extended
[Thu Jul  5 09:23:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 09:26:43 2012] Counts = 18908.000000, rescaling region sizes by 3.000000
[Thu Jul  5 09:26:43 2012] XMMSAS src. selection expression = ellipse(27128.138400, 27432.272800, 1071.858631, 1071.858631, 0.000000, X, Y)
[Thu Jul  5 09:26:43 2012] Writing source region out to fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul  5 09:26:43 2012] Extracting stamp from image fullrun_mos1_xmm0412600801_pi300-10000_cl_sm2.00.img.gz, (251, 254) - (374, 377)
[Thu Jul  5 09:26:44 2012] XMMSAS bgd. selection expression = annulus(27128.138400, 27432.272800, 5359.293154, 10718.586308, X, Y) && !ellipse(17459.746872, 25976.399841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34984.805389, 37940.875183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19210.175827, 22933.016754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17337.859787, 18387.333130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36110.075836, 25571.866302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.440643, 37881.723785, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 09:26:44 2012] Writing fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1.gif
[Thu Jul  5 09:26:49 2012] Mean detx,y = (198.49, -282.44) 
[Thu Jul  5 09:26:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 09:28:54 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 09:28:54 2012] Setting source spectrum file to fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 09:28:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul  5 10:14:59 2012] Updating aperture counts using extracted products
[Thu Jul  5 10:14:59 2012] Error reading totcts from fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 10:14:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 10:14:59 2012] Using photon index=1.80, rate=0.32, arf fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 10:14:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 10:14:59 2012] Updating source flux to 3e-12
[Thu Jul  5 10:15:11 2012] Reading fit data from xmm0412600801/analysis//spectral/fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul  5 10:15:11 2012] Spectral fit parameter nH value = 1.32508e+21
[Thu Jul  5 10:15:11 2012] Spectral fit parameter PhoIndex value = 8.89651
[Thu Jul  5 10:15:11 2012] Failed to get F(0.3-8.0) from xmm0412600801/analysis//spectral/fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul  5 10:15:11 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 10:15:11 2012] Using Nh = 1.3e+21, photon index=8.90, rate=0.32, arf fullrun_mos1_xmm0412600801_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 10:15:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 10:15:11 2012] Updating source flux to 2.2e-12