[Sun Jul 14 12:43:53 2013] Detection parameters:
  Position = (339.3, 192.9) = 18 56 14.40 -38 0 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 12.4
  Background counts = 29.5
  Rate = 0.002 +/- 0.0004

[Sun Jul 14 12:43:53 2013] Off-axis axis estimate = 8.20'
[Sun Jul 14 13:26:51 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 13:26:51 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Jul 14 13:26:51 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055
[Sun Jul 14 13:26:51 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.53"
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jul 14 14:00:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src11.csv
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jul 14 14:00:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src11.csv
[Sun Jul 14 14:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jul 14 14:00:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jul 14 14:00:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 14 14:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:00:19 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.747902 pixels away
[Sun Jul 14 14:00:19 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 14:00:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 14:00:19 2013] Assessing source extent using major
[Sun Jul 14 14:00:19 2013] Source does appear to be extended
[Sun Jul 14 14:00:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 14:21:24 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 14:21:24 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Jul 14 14:21:24 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055
[Sun Jul 14 14:21:24 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.53"
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src11.csv
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src11.csv
[Sun Jul 14 14:49:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun Jul 14 14:49:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:49:56 2013] Spatial fit model total counts = 338.473000, observed total counts = 251.000000
[Sun Jul 14 14:49:56 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 14 14:49:56 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 14:49:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 14:49:56 2013] Assessing source extent using major
[Sun Jul 14 14:49:56 2013] Source does appear to be extended
[Sun Jul 14 14:49:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 15:55:52 2013] XMMSAS src. selection expression = ellipse(29468.692627, 16735.814636, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 15:55:52 2013] Writing source region out to fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28_src.reg
[Sun Jul 14 15:55:52 2013] Extracting stamp from image fullrun_mos2_xmm0412600701_pi300-10000_cl_sm2.00.img.gz, (302, 155) - (377, 230)
[Sun Jul 14 15:55:52 2013] XMMSAS bgd. selection expression = annulus(29468.692627, 16735.814636, 1087.500000, 2175.000000, X, Y)
[Sun Jul 14 15:55:52 2013] Writing fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28.gif
[Sun Jul 14 15:59:20 2013] Mean detx,y = (6152.44, 6967.86) 
[Sun Jul 14 15:59:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 15:59:29 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 15:59:30 2013] Setting source spectrum file to fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Jul 14 15:59:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Jul 14 16:13:41 2013] Not generating rmf since there are only 74 counts
[Sun Jul 14 16:13:41 2013] rmf not generated due to insufficient counts
[Sun Jul 14 16:19:29 2013] Updating aperture counts using extracted products
[Sun Jul 14 16:19:29 2013] Total counts from fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 213.00
[Sun Jul 14 16:19:29 2013] Total counts from fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28_bgd.pi.gz = 1125.00
[Sun Jul 14 16:19:29 2013] Got source and background scale factors 996102.000000, 7396854.000000
[Sun Jul 14 16:19:29 2013] User source parameters:
  Position = (339.3, 192.9) = 18 56 14.40 -38 0 54.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 61.5 +/- 15.6
  Background aperture counts = 151.5
  Rate = 0.0009 +/- 0.0002

[Sun Jul 14 16:19:29 2013] Updating counts from extracted products
[Sun Jul 14 16:19:29 2013] Set source signif. to 61.50/12.31 = 5.00
[Sun Jul 14 16:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 14 16:19:31 2013] Using photon index=1.80, rate=0.000898, arf fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28.arf
[Sun Jul 14 16:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 14 16:19:31 2013] Updating source flux to 1.8e-14
[Sun Jul 14 16:19:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 14 16:19:35 2013] xmm0412600701/analysis//spectral/fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete