[Sun Jul 14 12:43:53 2013] Detection parameters:
  Position = (274.2, 289.7) = 18 56 38.35 -37 53 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.2 +/- 19.1
  Background counts = 46.9
  Rate = 0.002 +/- 0.0004

[Sun Jul 14 12:43:53 2013] Off-axis axis estimate = 1.87'
[Sun Jul 14 13:26:51 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 13:26:51 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Jul 14 13:26:51 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.780
[Sun Jul 14 13:26:51 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.36"
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jul 14 14:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src10.csv
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jul 14 14:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src10.csv
[Sun Jul 14 14:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jul 14 14:00:08 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jul 14 14:00:08 2013] Fit fullrun_mos2_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Jul 14 14:00:19 2013] Warning, spatial fit 10 centroid is now closest to src. 2
[Sun Jul 14 14:00:19 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 14:00:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 14:00:19 2013] Assessing source extent using major
[Sun Jul 14 14:00:19 2013] Source does appear to be extended
[Sun Jul 14 14:00:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 14:00:19 2013] Source is confused with source 24
[Sun Jul 14 14:21:24 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 14:21:24 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Jul 14 14:21:24 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.780
[Sun Jul 14 14:21:24 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.36"
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src10.csv
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src10.csv
[Sun Jul 14 14:49:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jul 14 14:49:48 2013] fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jul 14 14:49:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jul 14 14:49:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:49:56 2013] Source 23 is offset by 6.932124 and -7.096736 pixels which is larger than
2 X fitted extent = 0.846455 x 0.846455, not incorporating fit results
[Sun Jul 14 14:49:56 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 14:49:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 14:49:56 2013] Assessing source extent using major
[Sun Jul 14 14:49:56 2013] Source does appear to be extended
[Sun Jul 14 14:49:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 15:55:52 2013] XMMSAS src. selection expression = ellipse(23803.462799, 25153.215973, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 15:55:52 2013] Writing source region out to fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23_src.reg
[Sun Jul 14 15:55:52 2013] Extracting stamp from image fullrun_mos2_xmm0412600701_pi300-10000_cl_sm2.00.img.gz, (237, 252) - (312, 327)
[Sun Jul 14 15:55:52 2013] XMMSAS bgd. selection expression = annulus(23803.462799, 25153.215973, 1087.500000, 2175.000000, X, Y) && !ellipse(24423.018400, 24266.455200, 1135.255233, 970.807228, 353.441520, X, Y) && !ellipse(23910.919800, 23966.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23491.284454, 24739.421692, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 15:55:52 2013] Writing fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23.gif
[Sun Jul 14 15:59:06 2013] Mean detx,y = (-587.87, -344.42) 
[Sun Jul 14 15:59:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 15:59:17 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 15:59:17 2013] Setting source spectrum file to fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jul 14 15:59:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jul 14 16:13:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 14 16:13:34 2013] rmf not generated due to insufficient counts
[Sun Jul 14 16:19:29 2013] Updating aperture counts using extracted products
[Sun Jul 14 16:19:29 2013] Total counts from fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 1201.00
[Sun Jul 14 16:19:29 2013] Total counts from fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23_bgd.pi.gz = 370.00
[Sun Jul 14 16:19:29 2013] Got source and background scale factors 686970.000000, 462735.000000
[Sun Jul 14 16:19:29 2013] User source parameters:
  Position = (274.2, 289.7) = 18 56 38.35 -37 53 59.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 651.7 +/- 35.7
  Background aperture counts = 549.3
  Rate = 0.01 +/- 0.0005

[Sun Jul 14 16:19:29 2013] Updating counts from extracted products
[Sun Jul 14 16:19:29 2013] Set source signif. to 651.70/23.44 = 27.81
[Sun Jul 14 16:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 14 16:19:31 2013] Using photon index=1.80, rate=0.00951, arf fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23.arf
[Sun Jul 14 16:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 14 16:19:31 2013] Updating source flux to 1.2e-13
[Sun Jul 14 16:19:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 14 16:19:35 2013] xmm0412600701/analysis//spectral/fullrun_mos2_xmm0412600701_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete