[Sun Jul 14 12:43:36 2013] Detection parameters:
  Position = (190.3, 227.3) = 18 57 9.22 -37 58 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.9 +/- 17.8
  Background counts = 40.3
  Rate = 0.004 +/- 0.0004

[Sun Jul 14 12:43:37 2013] Off-axis axis estimate = 9.39'
[Sun Jul 14 13:09:13 2013] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 13:09:13 2013] Initial guess for spatial extent in simple fitting = 11.12"
[Sun Jul 14 13:09:13 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Sun Jul 14 13:09:13 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.12"
[Sun Jul 14 13:26:50 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jul 14 13:26:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_src5.csv
[Sun Jul 14 13:26:50 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jul 14 13:26:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_src5.csv
[Sun Jul 14 13:26:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 13:26:51 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jul 14 13:26:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jul 14 13:26:51 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jul 14 13:26:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jul 14 13:26:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600701_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:00:14 2013] Source 6 is offset by 0.486547 and 9.123439 pixels which is larger than
2 X fitted extent = 1.278414 x 1.278414, not incorporating fit results
[Sun Jul 14 14:00:14 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 14:00:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 14:00:14 2013] Assessing source extent using major
[Sun Jul 14 14:00:14 2013] Source does appear to be extended
[Sun Jul 14 14:00:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 14:10:40 2013] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 14:10:40 2013] Initial guess for spatial extent in simple fitting = 11.12"
[Sun Jul 14 14:10:40 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Sun Jul 14 14:10:40 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.12"
[Sun Jul 14 14:21:24 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jul 14 14:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_src5.csv
[Sun Jul 14 14:21:24 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jul 14 14:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_src5.csv
[Sun Jul 14 14:21:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:21:24 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jul 14 14:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jul 14 14:21:24 2013] fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jul 14 14:21:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jul 14 14:21:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600701_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 14:49:52 2013] Source 6 is offset by 0.593606 and 9.066841 pixels which is larger than
2 X fitted extent = 1.278414 x 1.278414, not incorporating fit results
[Sun Jul 14 14:49:52 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 14:49:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 14:49:52 2013] Assessing source extent using major
[Sun Jul 14 14:49:52 2013] Source does appear to be extended
[Sun Jul 14 14:49:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 15:34:39 2013] XMMSAS src. selection expression = ellipse(16504.496536, 19724.715195, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 15:34:39 2013] Writing source region out to fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 14 15:34:39 2013] Extracting stamp from image fullrun_mos1_xmm0412600701_pi300-10000_cl_sm2.00.img.gz, (153, 190) - (228, 265)
[Sun Jul 14 15:34:39 2013] XMMSAS bgd. selection expression = annulus(16504.496536, 19724.715195, 1087.500000, 2175.000000, X, Y) && !ellipse(15261.095871, 18653.499817, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 15:34:39 2013] Writing fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6.gif
[Sun Jul 14 15:36:58 2013] Mean detx,y = (6164.42, 7006.80) 
[Sun Jul 14 15:36:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 15:37:07 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 15:37:07 2013] Setting source spectrum file to fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 14 15:37:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jul 14 15:55:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 14 15:55:22 2013] rmf not generated due to insufficient counts
[Sun Jul 14 16:19:27 2013] Updating aperture counts using extracted products
[Sun Jul 14 16:19:27 2013] Total counts from fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 407.00
[Sun Jul 14 16:19:27 2013] Total counts from fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1308.00
[Sun Jul 14 16:19:27 2013] Got source and background scale factors 1217426.000000, 5800298.000000
[Sun Jul 14 16:19:27 2013] User source parameters:
  Position = (190.3, 227.3) = 18 57 9.22 -37 58 23.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 132.5 +/- 21.2
  Background aperture counts = 274.5
  Rate = 0.002 +/- 0.0003

[Sun Jul 14 16:19:27 2013] Updating counts from extracted products
[Sun Jul 14 16:19:27 2013] Set source signif. to 132.46/16.57 = 7.99
[Sun Jul 14 16:19:28 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 14 16:19:28 2013] Using photon index=1.80, rate=0.00194, arf fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6.arf
[Sun Jul 14 16:19:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 14 16:19:28 2013] Updating source flux to 2.9e-14
[Sun Jul 14 16:19:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 14 16:19:33 2013] xmm0412600701/analysis//spectral/fullrun_mos1_xmm0412600701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete