[Fri Nov 25 10:46:28 2011] Detection parameters:
  Position = (310.4, 290.1) = 18 56 36.48 -37 56 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.3 +/- 25.0
  Background counts = 131.6
  Rate = 0.004 +/- 0.0006

[Fri Nov 25 10:46:28 2011] Off-axis axis estimate = 1.06'
[Fri Nov 25 11:09:26 2011] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:09:26 2011] Initial guess for spatial extent in simple fitting = 6.96"
[Fri Nov 25 11:09:26 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908
[Fri Nov 25 11:09:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.96"
[Fri Nov 25 11:27:12 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_src1.ximg exists
[Fri Nov 25 11:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 11:27:12 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Nov 25 11:27:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_src1.csv
[Fri Nov 25 11:27:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 11:27:12 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Nov 25 11:27:12 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Nov 25 11:27:12 2011] Fit fullrun_pn_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Nov 25 14:19:34 2011] Spatial fit model total counts = 2532.990000, observed total counts = 2533.000000
[Fri Nov 25 14:19:34 2011] Offset between fit and detection position for source 1 = 5.803504 pixels
[Fri Nov 25 14:19:34 2011] 2502.990000 total counts/ 2061.550000 bgd. counts: snr = 9.722428
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.803504 pixels
  Position = (311.7, 295.7) = 18 56 35.99 -37 56 4.9
  Extent = 13.9 (13.8-27.8)", rotation angle = 0
  Source counts = 441.4 +/- 50.0
  Background counts = 2061.6
  Rate = 0.007 +/- 0.0008
[Fri Nov 25 14:19:34 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 14:19:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 14:19:34 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 14:19:34 2011] Source does appear to be extended
[Fri Nov 25 14:19:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:20:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:20:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 14:20:06 2011] Initial guess for spatial extent in simple fitting = 13.91"
[Fri Nov 25 14:20:06 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.896
[Fri Nov 25 14:20:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.91"
[Fri Nov 25 14:35:35 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 14:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 14:35:35 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 14:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_src1.csv
[Fri Nov 25 14:35:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:35:35 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 14:35:35 2011] fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 14:35:35 2011] Fit fullrun_pn_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 16:29:08 2011] Warning, spatial fit 1 centroid is now closest to src. 24
[Fri Nov 25 16:29:08 2011] Source 1 in spatial fitting is no longer close to this source
[Fri Nov 25 16:29:08 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:29:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:29:08 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 16:29:08 2011] Source does appear to be extended
[Fri Nov 25 16:29:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 16:29:23 2011] XMMSAS src. selection expression = ellipse(27068.581400, 25680.052000, 834.738024, 834.738024, 0.000000, X, Y)
[Fri Nov 25 16:29:23 2011] Writing source region out to fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 16:29:23 2011] Extracting stamp from image fullrun_pn_xmm0412600601_pi300-10000_cl_sm2.00.img.gz, (264, 248) - (360, 344)
[Fri Nov 25 16:29:23 2011] XMMSAS bgd. selection expression = annulus(27068.581400, 25680.052000, 1391.230040, 2782.460080, X, Y) && !ellipse(26784.880200, 24158.324400, 1153.880033, 269.524008, 95.278000, X, Y) && !ellipse(26710.474800, 23464.182200, 1165.960034, 1165.960034, 0.000000, X, Y) && !ellipse(27111.435520, 27441.468600, 1387.540840, 1387.540840, 0.000000, X, Y)
[Fri Nov 25 16:29:23 2011] Writing fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 16:37:51 2011] Mean detx,y = (77.76, 1475.62) 
[Fri Nov 25 16:38:10 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 16:38:31 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 16:38:31 2011] Setting source spectrum file to fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 16:38:31 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 18:54:14 2011] Updating aperture counts using extracted products
[Fri Nov 25 18:54:14 2011] Error reading totcts from fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 18:54:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 18:54:14 2011] Using photon index=1.80, rate=0.00706, arf fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 18:54:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 18:54:14 2011] Updating source flux to 1.6e-14
[Fri Nov 25 18:56:25 2011] Reading fit data from xmm0412600601/analysis//spectral/fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1_pl.csv
[Fri Nov 25 18:56:25 2011] Spectral fit parameter nH value = 9.00604e+20
[Fri Nov 25 18:56:25 2011] Spectral fit parameter PhoIndex value = 7.92182
[Fri Nov 25 18:56:25 2011] Failed to get F(0.3-8.0) from xmm0412600601/analysis//spectral/fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Nov 25 18:56:25 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 18:56:25 2011] Using Nh = 9e+20, photon index=7.92, rate=0.00706, arf fullrun_pn_xmm0412600601_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 18:56:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 18:56:25 2011] Updating source flux to 7.9e-15