[Fri Nov 25 10:47:47 2011] Detection parameters:
  Position = (341.8, 445.7) = 18 56 24.97 -37 45 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.5 +/- 13.1
  Background counts = 40.3
  Rate = 0.0009 +/- 0.0002

[Fri Nov 25 10:47:48 2011] Off-axis axis estimate = 11.13'
[Fri Nov 25 12:52:58 2011] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 12:52:58 2011] Initial guess for spatial extent in simple fitting = 11.99"
[Fri Nov 25 12:52:58 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.990
[Fri Nov 25 12:52:58 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 11.99"
[Fri Nov 25 14:19:30 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_src33.ximg exists
[Fri Nov 25 14:19:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_src33.csv
[Fri Nov 25 14:19:30 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Nov 25 14:19:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_src33.csv
[Fri Nov 25 14:19:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 14:19:30 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Nov 25 14:19:30 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Nov 25 14:19:30 2011] Fit fullrun_mos2_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri Nov 25 14:19:53 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.792134 pixels away
[Fri Nov 25 14:19:53 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 14:19:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 14:19:53 2011] Assessing source extent using major
[Fri Nov 25 14:19:53 2011] Source does appear to be extended
[Fri Nov 25 14:19:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 15:42:53 2011] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 15:42:53 2011] Initial guess for spatial extent in simple fitting = 11.99"
[Fri Nov 25 15:42:53 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.990
[Fri Nov 25 15:42:53 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 11.99"
[Fri Nov 25 16:29:06 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass1_src29.ximg exists
[Fri Nov 25 16:29:06 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Nov 25 16:29:06 2011] Fit fullrun_mos2_xmm0412600601_pi300-10000_cl_pass1_src29 appears to have run properly
[Fri Nov 25 16:29:07 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Nov 25 16:29:07 2011] fullrun_mos2_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Nov 25 16:29:07 2011] Fit fullrun_mos2_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Nov 25 16:29:15 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.790961 pixels away
[Fri Nov 25 16:29:15 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:29:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:29:15 2011] Assessing source extent using major
[Fri Nov 25 16:29:15 2011] Source does appear to be extended
[Fri Nov 25 16:29:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 18:06:56 2011] XMMSAS src. selection expression = ellipse(29685.080170, 38726.466492, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 18:06:56 2011] Writing source region out to fullrun_mos2_xmm0412600601_pi300-10000_pass1_cl_src24_src.reg
[Fri Nov 25 18:06:56 2011] Extracting stamp from image fullrun_mos2_xmm0412600601_pi300-10000_cl_sm2.00.img.gz, (304, 408) - (379, 483)
[Fri Nov 25 18:06:56 2011] XMMSAS bgd. selection expression = annulus(29685.080170, 38726.466492, 1087.500000, 2175.000000, X, Y) && !ellipse(31284.457683, 39654.442295, 697.544819, 266.316511, 21.771575, X, Y) && !ellipse(28479.313620, 37432.569600, 535.584015, 535.584015, 0.000000, X, Y) && !ellipse(32181.923020, 38488.767000, 726.973621, 726.973621, 0.000000, X, Y)
[Fri Nov 25 18:06:56 2011] Writing fullrun_mos2_xmm0412600601_pi300-10000_pass1_cl_src24.gif
[Fri Nov 25 18:18:09 2011] Mean detx,y = (-1287.10, 11476.42) 
[Fri Nov 25 18:18:09 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 18:18:24 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 18:18:24 2011] Setting source spectrum file to fullrun_mos2_xmm0412600601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Nov 25 18:18:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412600601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Nov 25 18:53:23 2011] Not generating rmf since there are only 55 counts
[Fri Nov 25 18:53:23 2011] rmf not generated due to insufficient counts
[Fri Nov 25 18:54:15 2011] Updating aperture counts using extracted products
[Fri Nov 25 18:54:15 2011] Error reading totcts from fullrun_mos2_xmm0412600601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Nov 25 18:54:15 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 18:54:15 2011] Using photon index=1.80, rate=0.00088, arf fullrun_mos2_xmm0412600601_pi300-10000_pass1_cl_src24.arf
[Fri Nov 25 18:54:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 18:54:15 2011] Updating source flux to 1.9e-14
[Fri Nov 25 18:54:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting