[Fri Nov 25 10:47:07 2011] Detection parameters:
  Position = (298.0, 501.7) = 18 56 41.02 -37 41 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.4 +/- 14.1
  Background counts = 23.7
  Rate = 0.001 +/- 0.0002

[Fri Nov 25 10:47:07 2011] Off-axis axis estimate = 14.74'
[Fri Nov 25 11:27:12 2011] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 11:27:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 11:27:12 2011] Initial guess for spatial extent in simple fitting = 13.80"
[Fri Nov 25 11:27:12 2011] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.983
[Fri Nov 25 11:27:12 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 13.80"
[Fri Nov 25 12:52:57 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass0_src18.ximg exists
[Fri Nov 25 12:52:57 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Nov 25 12:52:57 2011] Fit fullrun_mos1_xmm0412600601_pi300-10000_cl_pass0_src18 appears to have run properly
[Fri Nov 25 12:52:58 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Nov 25 12:52:58 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Nov 25 12:52:58 2011] Fit fullrun_mos1_xmm0412600601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Nov 25 14:19:43 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 17.751744 pixels away
[Fri Nov 25 14:19:43 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 14:19:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 14:19:43 2011] Assessing source extent using major
[Fri Nov 25 14:19:43 2011] Source does appear to be extended
[Fri Nov 25 14:19:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 14:35:35 2011] Using EEF radius (= 13.80 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 14:35:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 14:35:35 2011] Initial guess for spatial extent in simple fitting = 13.80"
[Fri Nov 25 14:35:35 2011] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.983
[Fri Nov 25 14:35:35 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 13.80"
[Fri Nov 25 15:42:53 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_src17.ximg exists
[Fri Nov 25 15:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_src17.csv
[Fri Nov 25 15:42:53 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Nov 25 15:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_src17.csv
[Fri Nov 25 15:42:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 15:42:53 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Nov 25 15:42:53 2011] fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Nov 25 15:42:53 2011] Fit fullrun_mos1_xmm0412600601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Nov 25 16:29:12 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 18.871885 pixels away
[Fri Nov 25 16:29:12 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 16:29:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 16:29:12 2011] Assessing source extent using major
[Fri Nov 25 16:29:12 2011] Source does appear to be extended
[Fri Nov 25 16:29:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 17:35:40 2011] XMMSAS src. selection expression = ellipse(25877.999146, 43598.668274, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Nov 25 17:35:40 2011] Writing source region out to fullrun_mos1_xmm0412600601_pi300-10000_pass1_cl_src19_src.reg
[Fri Nov 25 17:35:40 2011] Extracting stamp from image fullrun_mos1_xmm0412600601_pi300-10000_cl_sm2.00.img.gz, (261, 464) - (336, 539)
[Fri Nov 25 17:35:40 2011] XMMSAS bgd. selection expression = annulus(25877.999146, 43598.668274, 1087.500000, 2175.000000, X, Y)
[Fri Nov 25 17:35:40 2011] Writing fullrun_mos1_xmm0412600601_pi300-10000_pass1_cl_src19.gif
[Fri Nov 25 17:42:01 2011] Mean detx,y = (16213.10, -3086.16) 
[Fri Nov 25 17:42:02 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 17:42:11 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 17:42:11 2011] Setting source spectrum file to fullrun_mos1_xmm0412600601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Nov 25 17:42:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412600601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Nov 25 18:06:20 2011] Not generating rmf since there are only 91 counts
[Fri Nov 25 18:06:20 2011] rmf not generated due to insufficient counts
[Fri Nov 25 18:54:14 2011] Updating aperture counts using extracted products
[Fri Nov 25 18:54:14 2011] Error reading totcts from fullrun_mos1_xmm0412600601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Nov 25 18:54:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 18:54:14 2011] Using photon index=1.80, rate=0.00145, arf fullrun_mos1_xmm0412600601_pi300-10000_pass1_cl_src19.arf
[Fri Nov 25 18:54:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 18:54:14 2011] Updating source flux to 4e-14
[Fri Nov 25 18:54:16 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting