[Fri Mar 30 12:07:10 2012] Detection parameters:
  Position = (237.9, 154.0) = 18 56 51.59 -38 3 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.4 +/- 23.4
  Background counts = 104.5
  Rate = 0.003 +/- 0.0003

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 11.35'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 12.11 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 12.11"
[Fri Mar 30 13:53:31 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.835
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.11"
[Fri Mar 30 23:00:25 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src16.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src16.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src16.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Mar 30 23:00:28 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Mar 30 23:01:10 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.253695 pixels away
[Fri Mar 30 23:01:11 2012] Spatial fit model total counts = 856.810000, observed total counts = 856.000000
[Fri Mar 30 23:01:11 2012] Offset between fit and detection position for source 7 = 0.586451 pixels
[Fri Mar 30 23:01:11 2012] Warning, changing simple spatial fit ID from 16 to 59
[Fri Mar 30 23:01:11 2012] 859.011100 total counts/ 803.676000 bgd. counts: snr = 1.951912
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.586451 pixels
  Position = (238.2, 153.5) = 18 56 51.48 -38 3 47.4
  Extent = 3.5 (3.0-4.9)", rotation angle = 0
  Source counts = 55.3 +/- 29.3
  Background counts = 803.7
  Rate = 0.001 +/- 0.0005
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:01:11 2012] Deleting source due to low Poisson probability 0.9