[Fri Mar 30 12:07:12 2012] Detection parameters:
  Position = (271.4, 277.9) = 18 56 39.24 -37 54 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.5 +/- 19.9
  Background counts = 123.4
  Rate = 0.002 +/- 0.0004

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 2.46'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Fri Mar 30 13:53:31 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.734
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.66"
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src34.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src34.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src34.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Mar 30 23:00:28 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Mar 30 23:01:11 2012] Spatial fit model total counts = 2123.690000, observed total counts = 2024.000000
[Fri Mar 30 23:01:11 2012] Offset between fit and detection position for source 58 = 6.770055 pixels
[Fri Mar 30 23:01:11 2012] 2714.320000 total counts/ 1056.740000 bgd. counts: snr = 50.990635
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 6.770055 pixels
  Position = (265.3, 275.0) = 18 56 41.49 -37 54 58.9
  Extent = 15.3 (15.3-30.6)", rotation angle = 0
  Source counts = 1657.6 +/- 52.1
  Background counts = 1056.7
  Rate = 0.03 +/- 0.0009
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:01:11 2012] Source is confused with source 57
[Fri Mar 30 23:51:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 15.32"
[Fri Mar 30 23:51:38 2012] source mask rpix=3.5, npix_max = 64, mask sum = 2, frac = 0.031
[Fri Mar 30 23:51:38 2012] Skipping simple spatial due to low active detector fraction
[Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:32 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 07:20:32 2012] Source does appear to be extended
[Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:15:43 2012] Counts = 1657.580000, rescaling region sizes by 2.000000
[Sat Mar 31 11:15:43 2012] XMMSAS src. selection expression = ellipse(23031.118000, 23879.514000, 1838.028053, 1838.028053, 0.000000, X, Y)
[Sat Mar 31 11:15:43 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src58_src.reg
[Sat Mar 31 11:15:43 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (160, 169) - (371, 381)
[Sat Mar 31 11:15:43 2012] XMMSAS bgd. selection expression = annulus(23031.118000, 23879.514000, 6126.760176, 12253.520353, X, Y) && !ellipse(24439.404600, 24307.533800, 1154.551233, 1154.551233, 0.000000, X, Y) && !ellipse(14755.681839, 22858.163513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28641.313812, 36513.733215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16531.966797, 19810.033234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27063.754600, 35371.101800, 1121.904032, 1121.904032, 0.000000, X, Y) && !ellipse(23788.615875, 25102.106659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33429.746200, 22511.504400, 372.424011, 372.424011, 0.000000, X, Y) && !ellipse(32239.255524, 34807.778656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17230.255432, 29786.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.925842, 33808.359253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16407.076874, 32507.994934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22328.022400, 15017.878000, 1038.832030, 1038.832030, 0.000000, X, Y) && !ellipse(14841.155197, 32488.307892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23431.456024, 24649.562225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22554.815796, 17165.828491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17984.583771, 32186.162903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22459.735000, 15858.520400, 708.612820, 708.612820, 0.000000, X, Y) && !ellipse(17529.008621, 32220.598633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.680000, 35567.416000, 1644.016047, 1644.016047, 0.000000, X, Y) && !ellipse(21607.798000, 14962.800000, 1776.704051, 1776.704051, 0.000000, X, Y) && !ellipse(16920.072342, 32369.503296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27022.172000, 36105.322000, 1565.336045, 1565.336045, 0.000000, X, Y) && !ellipse(18492.360779, 32093.595306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21353.099091, 16066.382187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22162.170151, 17825.976303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14569.524460, 15333.210449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.492310, 32311.971466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26232.246400, 33009.716000, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(11077.070040, 16197.886600, 614.553618, 276.607208, 49.233037, X, Y) && !ellipse(14912.021912, 31798.857849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22664.795074, 17788.285507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.123322, 36582.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18363.064835, 31539.952667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15784.449936, 32554.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17031.649948, 31417.659363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14284.858856, 31165.951965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.334656, 31433.764771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.753754, 31949.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28101.387054, 35414.851105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.638397, 34314.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15772.434000, 31147.232000, 1753.376050, 1287.744037, 314.041800, X, Y) && !ellipse(13259.683014, 33015.442719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26873.874084, 32925.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.265472, 31543.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.365600, 36646.344000, 1716.280049, 1716.280049, 0.000000, X, Y) && !ellipse(22098.772034, 17350.664993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21163.212000, 12910.908000, 1913.176055, 1913.176055, 0.000000, X, Y) && !ellipse(30721.383240, 17193.098297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14056.588730, 32753.221405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21791.946228, 14285.211975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31945.465912, 16994.900360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21475.902161, 11326.362366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12379.668243, 33105.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21679.492462, 13340.689285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33368.616000, 12260.726200, 2098.152060, 2098.152060, 0.000000, X, Y) && !ellipse(12318.562744, 31681.863983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30402.580597, 18094.561722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22137.514221, 14478.265793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20493.504150, 10338.271973, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat Mar 31 11:15:43 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src58.gif
[Sat Mar 31 11:39:58 2012] Mean detx,y = (-0.26, 282.75) 
[Sat Mar 31 11:40:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 11:46:10 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 11:46:11 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Mar 31 11:46:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Mar 31 16:56:06 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:06 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Mar 31 16:56:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:12 2012] Using photon index=1.80, rate=0.0294, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src58.arf
[Sat Mar 31 16:56:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:12 2012] Getting flux using calc_pl_flux failed
[Sat Mar 31 16:56:50 2012] Flag c found in src. 58 procflags, skipping spectral fitting