[Fri Mar 30 12:07:12 2012] Detection parameters:
  Position = (164.8, 358.8) = 18 57 18.37 -37 48 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 18.2
  Background counts = 108.2
  Rate = 0.002 +/- 0.0005

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 10.63'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Fri Mar 30 13:53:31 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 11.75"
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src45.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src45.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src45.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri Mar 30 23:00:29 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Fri Mar 30 23:01:11 2012] Warning, spatial fit 45 centroid is now closest to src. 35
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:51:38 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Fri Mar 30 23:51:38 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879
[Fri Mar 30 23:51:38 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 11.75"
[Sat Mar 31 07:19:54 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src37.ximg exists
[Sat Mar 31 07:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src37.csv
[Sat Mar 31 07:19:54 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src37_1.ximg exists
[Sat Mar 31 07:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src37.csv
[Sat Mar 31 07:19:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Mar 31 07:19:56 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sat Mar 31 07:20:31 2012] Spatial fit model total counts = -84.118300, observed total counts = 693.000000
[Sat Mar 31 07:20:31 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 31 07:20:31 2012] Warning, spatial fit 37 centroid is now closest to src. 35
[Sat Mar 31 07:20:31 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.397081 pixels away
[Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:32 2012] Assessing source extent using major
[Sat Mar 31 07:20:32 2012] Source does appear to be extended
[Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:15:44 2012] XMMSAS src. selection expression = ellipse(14284.858856, 31165.951965, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 11:15:44 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src53_src.reg
[Sat Mar 31 11:15:44 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (127, 321) - (202, 396)
[Sat Mar 31 11:15:44 2012] XMMSAS bgd. selection expression = annulus(14284.858856, 31165.951965, 1087.500000, 2175.000000, X, Y) && !ellipse(17230.255432, 29786.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16407.076874, 32507.994934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14841.155197, 32488.307892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16920.072342, 32369.503296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14912.021912, 31798.857849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15784.449936, 32554.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17031.649948, 31417.659363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15772.434000, 31147.232000, 1753.376050, 1287.744037, 314.041800, X, Y) && !ellipse(13259.683014, 33015.442719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14056.588730, 32753.221405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12379.668243, 33105.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12318.562744, 31681.863983, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 11:15:44 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src53.gif
[Sat Mar 31 11:51:58 2012] Mean detx,y = (-11217.08, -4616.79) 
[Sat Mar 31 11:52:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 11:52:17 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 11:52:17 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Mar 31 11:52:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Mar 31 16:27:40 2012] Not generating rmf since there are only 72 counts
[Sat Mar 31 16:27:40 2012] rmf not generated due to insufficient counts
[Sat Mar 31 16:56:07 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:07 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Mar 31 16:56:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:12 2012] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src53.arf
[Sat Mar 31 16:56:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:12 2012] Updating source flux to 3.5e-14
[Sat Mar 31 16:56:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting