[Fri Mar 30 12:07:11 2012] Detection parameters:
  Position = (242.8, 102.4) = 18 56 49.80 -38 7 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.1 +/- 17.7
  Background counts = 72.1
  Rate = 0.001 +/- 0.0003

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 14.77'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Fri Mar 30 13:53:31 2012] source mask rpix=3.2, npix_max = 54, mask sum = 52, frac = 0.962
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 13.81"
[Fri Mar 30 23:00:27 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src69.ximg exists
[Fri Mar 30 23:00:27 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src69_1.ximg exists
[Fri Mar 30 23:00:27 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src69 appears to have run properly
[Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Fri Mar 30 23:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src69.csv
[Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Fri Mar 30 23:00:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src69.csv
[Fri Mar 30 23:00:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:01:11 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.025681 pixels away
[Fri Mar 30 23:01:11 2012] Spatial fit model total counts = 776.240000, observed total counts = 515.000000
[Fri Mar 30 23:01:11 2012] Poor agreement between spatial fit and data for source 41
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:01:11 2012] Source is confused with source 11
[Fri Mar 30 23:51:38 2012] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Fri Mar 30 23:51:38 2012] source mask rpix=3.2, npix_max = 54, mask sum = 52, frac = 0.962
[Fri Mar 30 23:51:38 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 13.81"
[Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src59.ximg exists
[Sat Mar 31 07:19:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src59.csv
[Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Mar 31 07:19:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src59.csv
[Sat Mar 31 07:19:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 07:19:57 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Mar 31 07:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Mar 31 07:19:57 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Mar 31 07:19:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Mar 31 07:19:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 07:20:31 2012] Warning, spatial fit 59 centroid is now closest to src. 11
[Sat Mar 31 07:20:32 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 11.502975 pixels away
[Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:32 2012] Assessing source extent using major
[Sat Mar 31 07:20:32 2012] Source does appear to be extended
[Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:15:44 2012] XMMSAS src. selection expression = ellipse(21077.301285, 8861.792259, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 11:15:44 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src41_src.reg
[Sat Mar 31 11:15:44 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (205, 65) - (280, 140)
[Sat Mar 31 11:15:44 2012] XMMSAS bgd. selection expression = annulus(21077.301285, 8861.792259, 1087.500000, 2175.000000, X, Y) && !ellipse(20526.102600, 8395.939491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21163.212000, 12910.908000, 1913.176055, 1913.176055, 0.000000, X, Y) && !ellipse(19615.207184, 8608.825050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21475.902161, 11326.362366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21241.088715, 8344.491661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20493.504150, 10338.271973, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat Mar 31 11:15:44 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src41.gif
[Sat Mar 31 12:06:29 2012] Mean detx,y = (-487.94, 16099.58) 
[Sat Mar 31 12:06:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 12:06:58 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 12:06:59 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Mar 31 12:06:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sat Mar 31 16:45:27 2012] Not generating rmf since there are only 89 counts
[Sat Mar 31 16:45:27 2012] rmf not generated due to insufficient counts
[Sat Mar 31 16:56:08 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:08 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Mar 31 16:56:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:13 2012] Using photon index=1.80, rate=0.0013, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src41.arf
[Sat Mar 31 16:56:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:13 2012] Updating source flux to 4.2e-14
[Sat Mar 31 16:56:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting