[Fri Mar 30 12:07:11 2012] Detection parameters:
  Position = (300.5, 371.9) = 18 56 28.53 -37 47 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.6 +/- 15.6
  Background counts = 95.0
  Rate = 0.002 +/- 0.0004

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 5.33'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Fri Mar 30 13:53:31 2012] source mask rpix=2.1, npix_max = 26, mask sum = 14, frac = 0.522
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.09"
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src33.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src33.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src33.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Mar 30 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Mar 30 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Mar 30 23:00:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:01:11 2012] Source 33 is offset by 7.575202 and -5.970823 pixels which is larger than
2 X fitted extent = 1.167007 x 1.167007, not incorporating fit results
[Fri Mar 30 23:01:11 2012] Spatial fit model total counts = 723.985000, observed total counts = 724.000000
[Fri Mar 30 23:01:11 2012] Offset between fit and detection position for source 33 = 0.932381 pixels
[Fri Mar 30 23:01:11 2012] Warning, changing simple spatial fit ID from 33 to 35
[Fri Mar 30 23:01:11 2012] 701.684600 total counts/ 689.439000 bgd. counts: snr = 0.466372
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.932381 pixels
  Position = (299.6, 371.7) = 18 56 28.87 -37 47 58.5
  Extent = 2.3" x 2.3", rotation angle = 0
  Source counts = 12.2 +/- 26.5
  Background counts = 689.4
  Rate = 0.0002 +/- 0.0005
  Deleting source due to low Poisson probability