[Fri Mar 30 12:07:11 2012] Detection parameters:
  Position = (304.2, 381.9) = 18 56 27.18 -37 47 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.8 +/- 17.1
  Background counts = 92.3
  Rate = 0.002 +/- 0.0004

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 6.07'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Fri Mar 30 13:53:31 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.013
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 9.46"
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src36.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src36.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src36.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Mar 30 23:00:28 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Mar 30 23:01:11 2012] Spatial fit model total counts = 601.490000, observed total counts = 547.000000
[Fri Mar 30 23:01:11 2012] Offset between fit and detection position for source 27 = 2.882432 pixels
[Fri Mar 30 23:01:11 2012] 610.613400 total counts/ 531.398000 bgd. counts: snr = 3.436368
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.882432 pixels
  Position = (302.1, 380.0) = 18 56 27.96 -37 47 22.4
  Extent = 9.8 (4.6-18.9)", rotation angle = 0
  Source counts = 79.2 +/- 24.7
  Background counts = 531.4
  Rate = 0.001 +/- 0.0004
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:01:11 2012] Source is confused with source 29
[Fri Mar 30 23:51:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Fri Mar 30 23:51:38 2012] source mask rpix=2.2, npix_max = 30, mask sum = 19, frac = 0.631
[Fri Mar 30 23:51:38 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 9.76"
[Sat Mar 31 07:19:54 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src29.ximg exists
[Sat Mar 31 07:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src29.csv
[Sat Mar 31 07:19:54 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Mar 31 07:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src29.csv
[Sat Mar 31 07:19:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Mar 31 07:19:56 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Mar 31 07:20:31 2012] Warning, spatial fit 29 centroid is now closest to src. 26
[Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:32 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 07:20:32 2012] Source does appear to be extended
[Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:15:44 2012] XMMSAS src. selection expression = ellipse(26232.246400, 33009.716000, 585.498617, 585.498617, 0.000000, X, Y)
[Sat Mar 31 11:15:44 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src27_src.reg
[Sat Mar 31 11:15:44 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (268, 346) - (336, 414)
[Sat Mar 31 11:15:44 2012] XMMSAS bgd. selection expression = annulus(26232.246400, 33009.716000, 975.831028, 1951.662056, X, Y) && !ellipse(27063.754600, 35371.101800, 1121.904032, 1121.904032, 0.000000, X, Y) && !ellipse(26445.925842, 33808.359253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.680000, 35567.416000, 1644.016047, 1644.016047, 0.000000, X, Y) && !ellipse(27022.172000, 36105.322000, 1565.336045, 1565.336045, 0.000000, X, Y) && !ellipse(26795.492310, 32311.971466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.334656, 31433.764771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.753754, 31949.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28101.387054, 35414.851105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.638397, 34314.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26873.874084, 32925.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.265472, 31543.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.365600, 36646.344000, 1716.280049, 1716.280049, 0.000000, X, Y)
[Sat Mar 31 11:15:44 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src27.gif
[Sat Mar 31 11:47:01 2012] Mean detx,y = (305.35, -8643.74) 
[Sat Mar 31 11:47:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 11:47:24 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 11:47:25 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Mar 31 11:47:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Mar 31 16:25:57 2012] Not generating rmf since there are only 79 counts
[Sat Mar 31 16:25:57 2012] rmf not generated due to insufficient counts
[Sat Mar 31 16:56:06 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:06 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Mar 31 16:56:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:12 2012] Using photon index=1.80, rate=0.00141, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src27.arf
[Sat Mar 31 16:56:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:12 2012] Updating source flux to 2.2e-14
[Sat Mar 31 16:56:50 2012] Flag c found in src. 27 procflags, skipping spectral fitting
[Sat Mar 31 16:56:50 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting