[Fri Mar 30 12:07:11 2012] Detection parameters:
  Position = (312.4, 408.9) = 18 56 24.19 -37 45 14.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.2 +/- 21.4
  Background counts = 89.2
  Rate = 0.005 +/- 0.0006

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 8.07'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Mar 30 13:53:31 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.46"
[Fri Mar 30 23:00:25 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Mar 30 23:00:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src5.csv
[Fri Mar 30 23:00:25 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Mar 30 23:00:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src5.csv
[Fri Mar 30 23:00:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Mar 30 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Mar 30 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Mar 30 23:00:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:01:10 2012] Warning, spatial fit 5 centroid is now closest to src. 20
[Fri Mar 30 23:01:10 2012] Spatial fit model total counts = 686.503000, observed total counts = 629.000000
[Fri Mar 30 23:01:10 2012] Offset between fit and detection position for source 23 = 1.352320 pixels
[Fri Mar 30 23:01:10 2012] Warning, changing simple spatial fit ID from 5 to 21
[Fri Mar 30 23:01:10 2012] 669.723000 total counts/ 303.335000 bgd. counts: snr = 21.036815
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.352320 pixels
  Position = (311.5, 407.8) = 18 56 24.50 -37 45 21.3
  Extent = 20.6 (11.4-41.1)", rotation angle = 0
  Source counts = 366.4 +/- 25.9
  Background counts = 303.3
  Rate = 0.007 +/- 0.0005
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:01:11 2012] Source is confused with source 24
[Fri Mar 30 23:01:11 2012] Source is confused with source 21
[Fri Mar 30 23:01:11 2012] Source is confused with source 22
[Fri Mar 30 23:01:11 2012] Source is confused with source 25
[Fri Mar 30 23:01:11 2012] Source is confused with source 20
[Fri Mar 30 23:51:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:51:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 20.55"
[Fri Mar 30 23:51:38 2012] source mask rpix=4.7, npix_max = 109, mask sum = 102, frac = 0.934
[Fri Mar 30 23:51:38 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 20.55"
[Sat Mar 31 07:19:53 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src5.ximg exists
[Sat Mar 31 07:19:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src5.csv
[Sat Mar 31 07:19:53 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Mar 31 07:19:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src5.csv
[Sat Mar 31 07:19:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Mar 31 07:19:55 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Mar 31 07:20:31 2012] Spatial fit model total counts = 1831.940000, observed total counts = 1737.000000
[Sat Mar 31 07:20:31 2012] Offset between fit and detection position for source 23 = 0.713950 pixels
[Sat Mar 31 07:20:31 2012] 1796.585000 total counts/ 1614.110000 bgd. counts: snr = 4.541892
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.713950 pixels
  Position = (311.6, 407.1) = 18 56 24.46 -37 45 24.3
  Extent = 14.0 (10.1-20.2)", rotation angle = 0
  Source counts = 182.5 +/- 42.4
  Background counts = 1614.1
  Rate = 0.003 +/- 0.0008
[Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:32 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 07:20:32 2012] Source does appear to be extended
[Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:15:43 2012] XMMSAS src. selection expression = ellipse(27063.754600, 35371.101800, 841.428024, 841.428024, 0.000000, X, Y)
[Sat Mar 31 11:15:43 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src23_src.reg
[Sat Mar 31 11:15:43 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (263, 359) - (360, 455)
[Sat Mar 31 11:15:43 2012] XMMSAS bgd. selection expression = annulus(27063.754600, 35371.101800, 1402.380040, 2804.760081, X, Y) && !ellipse(28641.313812, 36513.733215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.925842, 33808.359253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.680000, 35567.416000, 1644.016047, 1644.016047, 0.000000, X, Y) && !ellipse(27022.172000, 36105.322000, 1565.336045, 1565.336045, 0.000000, X, Y) && !ellipse(26795.492310, 32311.971466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26232.246400, 33009.716000, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(27637.123322, 36582.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.753754, 31949.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28101.387054, 35414.851105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.638397, 34314.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26873.874084, 32925.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.365600, 36646.344000, 1716.280049, 1716.280049, 0.000000, X, Y) && !ellipse(27340.057404, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 11:15:43 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src23.gif
[Sat Mar 31 11:22:40 2012] Mean detx,y = (647.41, -11102.21) 
[Sat Mar 31 11:22:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 11:23:11 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 11:23:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Mar 31 11:23:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Mar 31 16:56:05 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:05 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Mar 31 16:56:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:09 2012] Using photon index=1.80, rate=0.00324, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src23.arf
[Sat Mar 31 16:56:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:09 2012] Updating source flux to 5.4e-14
[Sat Mar 31 16:56:50 2012] Flag c found in src. 23 procflags, skipping spectral fitting