[Fri Mar 30 12:07:11 2012] Detection parameters:
  Position = (314.0, 416.0) = 18 56 23.58 -37 44 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.0 +/- 18.0
  Background counts = 88.8
  Rate = 0.003 +/- 0.0005

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 8.60'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Fri Mar 30 13:53:31 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.73"
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src27.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src27.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src27.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Mar 30 23:00:28 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Mar 30 23:00:28 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Mar 30 23:01:10 2012] Warning, spatial fit 27 centroid is now closest to src. 20
[Fri Mar 30 23:01:11 2012] Spatial fit model total counts = 595.606000, observed total counts = 555.000000
[Fri Mar 30 23:01:11 2012] Offset between fit and detection position for source 21 = 3.422864 pixels
[Fri Mar 30 23:01:11 2012] Warning, changing simple spatial fit ID from 27 to 55
[Fri Mar 30 23:01:11 2012] 617.757000 total counts/ 512.711000 bgd. counts: snr = 4.639201
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 3.422864 pixels
  Position = (310.9, 417.3) = 18 56 24.74 -37 44 40.0
  Extent = 13.3 (9.1-20.4)", rotation angle = 0
  Source counts = 105.0 +/- 24.9
  Background counts = 512.7
  Rate = 0.002 +/- 0.0004
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:01:11 2012] Source is confused with source 23
[Fri Mar 30 23:51:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 13.31"
[Fri Mar 30 23:51:38 2012] source mask rpix=3.1, npix_max = 50, mask sum = 38, frac = 0.750
[Fri Mar 30 23:51:38 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.31"
[Sat Mar 31 07:19:54 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src23.ximg exists
[Sat Mar 31 07:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src23.csv
[Sat Mar 31 07:19:54 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Mar 31 07:19:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src23.csv
[Sat Mar 31 07:19:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Mar 31 07:19:56 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Mar 31 07:20:31 2012] Warning, spatial fit 23 centroid is now closest to src. 17
[Sat Mar 31 07:20:31 2012] Spatial fit model total counts = 696.821000, observed total counts = 696.000000
[Sat Mar 31 07:20:31 2012] Offset between fit and detection position for source 21 = 1.760735 pixels
[Sat Mar 31 07:20:31 2012] Warning, changing simple spatial fit ID from 23 to 33
[Sat Mar 31 07:20:31 2012] 667.334700 total counts/ 602.126000 bgd. counts: snr = 2.657430
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.760735 pixels
  Position = (311.2, 415.6) = 18 56 24.63 -37 44 47.6
  Extent = 19.6 (15.0-21.9)", rotation angle = 0
  Source counts = 65.2 +/- 25.8
  Background counts = 602.1
  Rate = 0.001 +/- 0.0005
[Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:32 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 07:20:32 2012] Source does appear to be extended
[Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:15:43 2012] XMMSAS src. selection expression = ellipse(27022.172000, 36105.322000, 1174.002034, 1174.002034, 0.000000, X, Y)
[Sat Mar 31 11:15:43 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src21_src.reg
[Sat Mar 31 11:15:43 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (244, 348) - (379, 483)
[Sat Mar 31 11:15:43 2012] XMMSAS bgd. selection expression = annulus(27022.172000, 36105.322000, 1956.670056, 3913.340113, X, Y) && !ellipse(28641.313812, 36513.733215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27063.754600, 35371.101800, 1121.904032, 1121.904032, 0.000000, X, Y) && !ellipse(26445.925842, 33808.359253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.680000, 35567.416000, 1644.016047, 1644.016047, 0.000000, X, Y) && !ellipse(26795.492310, 32311.971466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26232.246400, 33009.716000, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(27637.123322, 36582.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.334656, 31433.764771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.753754, 31949.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28101.387054, 35414.851105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.638397, 34314.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26873.874084, 32925.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.265472, 31543.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.365600, 36646.344000, 1716.280049, 1716.280049, 0.000000, X, Y) && !ellipse(27751.021423, 40654.721344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27462.369293, 39281.433990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27340.057404, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30721.619537, 40608.874298, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 11:15:43 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src21.gif
[Sat Mar 31 11:36:04 2012] Mean detx,y = (600.35, -11782.02) 
[Sat Mar 31 11:36:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 11:36:54 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 11:36:54 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Mar 31 11:36:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Mar 31 13:14:17 2012] Not generating rmf since there are only 65 counts
[Sat Mar 31 13:14:17 2012] rmf not generated due to insufficient counts
[Sat Mar 31 16:56:06 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:06 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Mar 31 16:56:11 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:11 2012] Using photon index=1.80, rate=0.00116, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src21.arf
[Sat Mar 31 16:56:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:11 2012] Updating source flux to 1.9e-14
[Sat Mar 31 16:56:50 2012] Flag c found in src. 21 procflags, skipping spectral fitting
[Sat Mar 31 16:56:50 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting