[Fri Mar 30 12:07:11 2012] Detection parameters: Position = (312.6, 421.0) = 18 56 24.10 -37 44 21.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 111.1 +/- 18.4 Background counts = 85.0 Rate = 0.002 +/- 0.0003 [Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 8.95' [Fri Mar 30 13:53:31 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting [Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 10.90" [Fri Mar 30 13:53:31 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996 [Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.90" [Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src55.ximg exists [Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src55.csv [Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src55_1.ximg exists [Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src55.csv [Fri Mar 30 23:00:26 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Fri Mar 30 23:00:29 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Fri Mar 30 23:01:10 2012] Source 20 is offset by 7.404734 and 4.269608 pixels which is larger than 2 X fitted extent = 0.847972 x 0.847972, not incorporating fit results [Fri Mar 30 23:01:10 2012] Spatial fit model total counts = 689.089000, observed total counts = 627.000000 [Fri Mar 30 23:01:10 2012] Offset between fit and detection position for source 20 = 2.864877 pixels [Fri Mar 30 23:01:10 2012] Warning, changing simple spatial fit ID from 55 to 27 [Fri Mar 30 23:01:10 2012] 649.844000 total counts/ 457.494000 bgd. counts: snr = 8.992894 Spatial fit parameters: Offset between fit and detection position for source 20 = 2.864877 pixels Position = (315.4, 421.8) = 18 56 23.08 -37 44 20.5 Extent = 21.5 (21.4-42.9)", rotation angle = 0 Source counts = 192.3 +/- 25.5 Background counts = 457.5 Rate = 0.003 +/- 0.0005 [Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000 [Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Mar 30 23:01:11 2012] Assessing source extent using major axis lower bound [Fri Mar 30 23:01:11 2012] Source does appear to be extended [Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Mar 30 23:01:11 2012] Source is confused with source 8 [Fri Mar 30 23:51:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 21.45" [Fri Mar 30 23:51:38 2012] source mask rpix=4.9, npix_max = 118, mask sum = 121, frac = 1.025 [Fri Mar 30 23:51:38 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 21.45" [Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src46.ximg exists [Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src46_1.ximg exists [Sat Mar 31 07:19:55 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src46 appears to have run properly [Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists [Sat Mar 31 07:19:56 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists [Sat Mar 31 07:19:56 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly [Sat Mar 31 07:20:31 2012] Source 20 is offset by 2.035306 and 4.133770 pixels which is larger than 2 X fitted extent = 1.205756 x 1.205756, not incorporating fit results [Sat Mar 31 07:20:31 2012] Warning, spatial fit 46 centroid is now closest to src. 17 [Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000 [Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 31 07:20:32 2012] Assessing source extent using major axis lower bound [Sat Mar 31 07:20:32 2012] Source does appear to be extended [Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Mar 31 11:15:44 2012] XMMSAS src. selection expression = ellipse(27390.365600, 36646.344000, 1287.210037, 1287.210037, 0.000000, X, Y) [Sat Mar 31 11:15:44 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src20_src.reg [Sat Mar 31 11:15:44 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (241, 348) - (389, 496) [Sat Mar 31 11:15:44 2012] XMMSAS bgd. selection expression = annulus(27390.365600, 36646.344000, 2145.350062, 4290.700123, X, Y) && !ellipse(28641.313812, 36513.733215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27063.754600, 35371.101800, 1121.904032, 1121.904032, 0.000000, X, Y) && !ellipse(32239.255524, 34807.778656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.925842, 33808.359253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.680000, 35567.416000, 1644.016047, 1644.016047, 0.000000, X, Y) && !ellipse(27022.172000, 36105.322000, 1565.336045, 1565.336045, 0.000000, X, Y) && !ellipse(26795.492310, 32311.971466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26232.246400, 33009.716000, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(27637.123322, 36582.044464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.753754, 31949.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28101.387054, 35414.851105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.638397, 34314.009583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26873.874084, 32925.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.265472, 31543.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27751.021423, 40654.721344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27462.369293, 39281.433990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27340.057404, 37969.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28689.221161, 41219.361115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27917.005890, 41259.096283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29198.984131, 41101.130005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30721.619537, 40608.874298, 870.000000, 870.000000, 0.000000, X, Y) [Sat Mar 31 11:15:44 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src20.gif [Sat Mar 31 11:57:37 2012] Mean detx,y = (926.33, -12414.22) [Sat Mar 31 11:57:40 2012] Setting backscal keywords in source and bgd. spectrum [Sat Mar 31 11:58:14 2012] Binned source spectrum to 10 counts/bin [Sat Mar 31 11:58:14 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Sat Mar 31 11:58:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src20_bgd.pi.gz [Sat Mar 31 16:56:08 2012] Updating aperture counts using extracted products [Sat Mar 31 16:56:08 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src20_src_b10.pi.gz [Sat Mar 31 16:56:13 2012] Calculating source flux in energy range 0.30-8.00 [Sat Mar 31 16:56:13 2012] Using photon index=1.80, rate=0.00342, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src20.arf [Sat Mar 31 16:56:13 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Mar 31 16:56:13 2012] Updating source flux to 5.6e-14 [Sat Mar 31 16:56:50 2012] Flag b found in src. 20 procflags, skipping spectral fitting [Sat Mar 31 16:56:50 2012] Flag c found in src. 20 procflags, skipping spectral fitting