[Fri Mar 30 12:07:10 2012] Detection parameters:
  Position = (281.4, 279.9) = 18 56 35.58 -37 54 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36425.8 +/- 226.1
  Background counts = 116.1
  Rate = 0.6 +/- 0.004

[Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 1.83'
[Fri Mar 30 13:53:31 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Mar 30 13:53:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Fri Mar 30 23:00:25 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 30 23:00:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src1.csv
[Fri Mar 30 23:00:25 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 30 23:00:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src1.csv
[Fri Mar 30 23:00:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:27 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 30 23:00:27 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 30 23:00:27 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 30 23:01:10 2012] Spatial fit model total counts = 27434.200000, observed total counts = 26678.000000
[Fri Mar 30 23:01:10 2012] Offset between fit and detection position for source 2 = 0.152686 pixels
[Fri Mar 30 23:01:10 2012] 27396.390000 total counts/ 6837.790000 bgd. counts: snr = 248.619768
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.152686 pixels
  Position = (281.5, 280.0) = 18 56 35.54 -37 54 37.5
  Extent = 4.8 (4.7-4.9)", rotation angle = 0
  Source counts = 20558.6 +/- 165.5
  Background counts = 6837.8
  Rate = 0.4 +/- 0.003
[Fri Mar 30 23:01:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:01:11 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 23:01:11 2012] Source does appear to be extended
[Fri Mar 30 23:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:51:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:51:38 2012] Initial guess for spatial extent in simple fitting = 4.82"
[Fri Mar 30 23:51:38 2012] source mask rpix=1.1, npix_max = 10, mask sum = 10, frac = 0.967
[Fri Mar 30 23:51:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.82"
[Sat Mar 31 07:19:53 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 31 07:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 07:19:53 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 31 07:19:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 07:19:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 31 07:19:55 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 31 07:19:55 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 31 07:20:31 2012] Spatial fit model total counts = 27501.800000, observed total counts = 26678.000000
[Sat Mar 31 07:20:31 2012] Offset between fit and detection position for source 2 = 0.002477 pixels
[Sat Mar 31 07:20:31 2012] 27459.880000 total counts/ 6877.780000 bgd. counts: snr = 248.179294
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002477 pixels
  Position = (281.5, 280.0) = 18 56 35.54 -37 54 37.5
  Extent = 4.8 (4.8-4.9)", rotation angle = 0
  Source counts = 20582.1 +/- 165.7
  Background counts = 6877.8
  Rate = 0.4 +/- 0.003
[Sat Mar 31 07:20:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:32 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 07:20:32 2012] Source does appear to be extended
[Sat Mar 31 07:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 11:15:42 2012] Counts = 20582.100000, rescaling region sizes by 3.000000
[Sat Mar 31 11:15:42 2012] XMMSAS src. selection expression = ellipse(24439.404600, 24307.533800, 865.913425, 865.913425, 0.000000, X, Y)
[Sat Mar 31 11:15:42 2012] Writing source region out to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 31 11:15:42 2012] Extracting stamp from image fullrun_mos2_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (232, 230) - (331, 330)
[Sat Mar 31 11:15:42 2012] XMMSAS bgd. selection expression = annulus(24439.404600, 24307.533800, 4329.567125, 8659.134249, X, Y) && !ellipse(16531.966797, 19810.033234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.615875, 25102.106659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33429.746200, 22511.504400, 372.424011, 372.424011, 0.000000, X, Y) && !ellipse(17230.255432, 29786.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26445.925842, 33808.359253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16407.076874, 32507.994934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22328.022400, 15017.878000, 1038.832030, 1038.832030, 0.000000, X, Y) && !ellipse(23431.456024, 24649.562225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22554.815796, 17165.828491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17984.583771, 32186.162903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22459.735000, 15858.520400, 708.612820, 708.612820, 0.000000, X, Y) && !ellipse(17529.008621, 32220.598633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21607.798000, 14962.800000, 1776.704051, 1776.704051, 0.000000, X, Y) && !ellipse(16920.072342, 32369.503296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18492.360779, 32093.595306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21353.099091, 16066.382187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22162.170151, 17825.976303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23031.118000, 23879.514000, 1225.352035, 1225.352035, 0.000000, X, Y) && !ellipse(26795.492310, 32311.971466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26232.246400, 33009.716000, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(14912.021912, 31798.857849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22664.795074, 17788.285507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18363.064835, 31539.952667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15784.449936, 32554.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17031.649948, 31417.659363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.334656, 31433.764771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.753754, 31949.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15772.434000, 31147.232000, 1753.376050, 1287.744037, 314.041800, X, Y) && !ellipse(26873.874084, 32925.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.265472, 31543.369690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22098.772034, 17350.664993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30721.383240, 17193.098297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31945.465912, 16994.900360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30402.580597, 18094.561722, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 11:15:42 2012] Writing fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2.gif
[Sat Mar 31 11:16:02 2012] Mean detx,y = (58.23, 266.40) 
[Sat Mar 31 11:16:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 11:20:29 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 11:20:30 2012] Setting source spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 11:20:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 31 16:56:04 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:05 2012] Error reading totcts from fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 16:56:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:09 2012] Using photon index=1.80, rate=0.365, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2.arf
[Sat Mar 31 16:56:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:09 2012] Updating source flux to 3.4e-12
[Sat Mar 31 17:03:38 2012] Reading fit data from xmm0412600201/analysis//spectral/fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2_pl.csv
[Sat Mar 31 17:03:38 2012] Spectral fit parameter nH value = 1.26126e+21
[Sat Mar 31 17:03:38 2012] Spectral fit parameter PhoIndex value = 8.8696
[Sat Mar 31 17:03:38 2012] Failed to get F(0.3-8.0) from xmm0412600201/analysis//spectral/fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Mar 31 17:03:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 17:03:38 2012] Using Nh = 1.3e+21, photon index=8.87, rate=0.365, arf fullrun_mos2_xmm0412600201_pi300-10000_pass1_cl_src2.arf
[Sat Mar 31 17:03:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 17:03:38 2012] Updating source flux to 2.5e-12